Idle drops to 750 RPM and then back to 800-900 RPM
#1
Registered
Thread Starter
Idle drops to 750 RPM and then back to 800-900 RPM
So I noticed that every once in a while when I do a complete stop my 2010 RX-8, the idle will bog down to 750 RPM for about a second and then back to normal 800-900 RPM.
Is this is normal?
Is this is normal?
#4
Sorry guys, need some help, been through a bunch of the forrums and searched google, I have a 09 rx8 and when I got about 6k rpm I get gas and oil coming back out through the tb, have already replaced plugs,could,wires,and the maf sensor, reset the ecu cleaned connectors and checked vacuum lines, the only thing i can think of now is the ssv or carbon build up
#5
Registered
iTrader: (1)
Sorry guys, need some help, been through a bunch of the forrums and searched google, I have a 09 rx8 and when I got about 6k rpm I get gas and oil coming back out through the tb, have already replaced plugs,could,wires,and the maf sensor, reset the ecu cleaned connectors and checked vacuum lines, the only thing i can think of now is the ssv or carbon build up
It's not any of those things. It sounds like excess blowby, you're looking at a new engine.
Fortunately, an 09 might still be under engine warranty (8 years/100,000 miles) depending of exact date of purchase. Call Mazda.
#7
Registered
I guess I'll add my two cents. This is pretty normal with the A/C on as mentioned before. What I did notice was that when my motor mounts were busted this was a lot more pronounced. Car never stalled but it would give every indication it was considering it. After the new mounts everything has been smooth.