RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   New Member Forum (https://www.rx8club.com/new-member-forum-197/)
-   -   Few questions. What is this powder stuff and what is this part? (https://www.rx8club.com/new-member-forum-197/few-questions-what-powder-stuff-what-part-264447/)

theguy1991 01-25-2017 02:12 PM

Few questions. What is this powder stuff and what is this part?
 
3 questions here about my 2009 R3. First, I got this white powder mold looking stuff just inside my door, I took a picture of it. The stuff comes off if I scrape with my nail but is there a more effective way of removing it and has anyone else seen anything like it? Second question, what is the panel called that sits in front of the rear wheels. One side is looking pretty rough, as if the paint is cracking. Is it called a stone guard? I think its #1 on this page here. https://www.onlinemazdaparts.com/a/M...R/5455542.html

Last question. Can the hoods of an 04-08 rx8 be easily swapped over to an 09? Are they the same size? Same bolt configuration, etc.?
https://cimg7.ibsrv.net/gimg/www.rx8...0b5b4afa49.jpghttps://cimg3.ibsrv.net/gimg/www.rx8...c1a5073342.jpg

KrisRX 01-25-2017 02:35 PM


what is the panel called that sits in front of the rear wheels.
Quarter Panel, front one is Fender.

Hoods are dif on both models i believe.

The white stuff no idea how to get best rid of it, doubt is mold though.

drum-beats 01-25-2017 03:08 PM

Hoods are the same, i have swapped them over before

CelestialGryphon 01-25-2017 04:39 PM

Idk what the white stuff is. I've got it on my car. It never bothered me though.

wannawankel 01-25-2017 07:28 PM

Powder coating of the silicone door seal? Some POS owners also put talcum powder or graphite on their seals to keep them from sticking. Keeping them clean - priceless.

supermiatavaper 01-25-2017 07:42 PM

Just clean the powder, it's like some dried cleaning agent or something else harmless. The clear vinyl / plastic pads on the sides are rock / chip protectors, and based on the condition I see yours are in, I would definitely replace them. They can't be salvaged like that unless you gently cut off the edges and then plastic polish the protector itself. I don't recommended this. Or, just heat it up and peel it off, clean underneath, and leave it as is.

theguy1991 01-25-2017 10:15 PM


Originally Posted by wannawankel (Post 4802490)
Powder coating of the silicone door seal? Some POS owners also put talcum powder or graphite on their seals to keep them from sticking. Keeping them clean - priceless.

Its just weird because the powder just appeared about a week ago. I got my car in 2012

theguy1991 01-25-2017 10:24 PM


Originally Posted by supermiatavaper (Post 4802493)
Just clean the powder, it's like some dried cleaning agent or something else harmless. The clear vinyl / plastic pads on the sides are rock / chip protectors, and based on the condition I see yours are in, I would definitely replace them. They can't be salvaged like that unless you gently cut off the edges and then plastic polish the protector itself. I don't recommended this. Or, just heat it up and peel it off, clean underneath, and leave it as is.

Wait they're basically stickers? They just peel off???? I always thought they were actual little panels or something. :Eyecrazy:

ECS 01-26-2017 08:38 AM

Lol, yeah, it's just a piece of film. 3m makes a paint protection film that most detail shops have and can apply. That price from onlinemazdaparts is ridiculous, you can buy a whole roll of 3m film for that price, BTW.

KrisRX 01-26-2017 12:08 PM


Originally Posted by drum-beats (Post 4802465)
Hoods are the same, i have swapped them over before

my bad, still learning. :icon_tup:


All times are GMT -5. The time now is 06:06 PM.


© 2024 MH Sub I, LLC dba Internet Brands