RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   New Member Forum (https://www.rx8club.com/new-member-forum-197/)
-   -   4 port engine (https://www.rx8club.com/new-member-forum-197/4-port-engine-260981/)

dacowgod 12-15-2015 10:11 AM

4 port engine
 
So I bought one of these JDM 4 port things a while back to try and flip one of my RX-8 chassis and after digging some I realized it wont work in the manual car without some significant work..

some people waned to convert it to 6 port and what not.. which seems overkill for me..


Are they a direct swap into the Auto cars though? I know they were 4 port .. but I dont know the variances between the JDM and USDM cars?

Is there any way to shove this in the manual car without converting it to 6 port? Are the ECU's that pissy about it?

200.mph 12-15-2015 10:15 AM

4 ports were in 04, 05 auto 8s in the us.
all us m/t are 6 port
06+ all 8s are 6 port
in europe and i think some other countries there was a 4 port 5spd m/t
i thint the ecu is different from us/japan and will be different from 4/6 port

dannobre 12-15-2015 10:15 AM

Easy answer...NO...and Yes they are that pissy ;)

BigBadChris 12-15-2015 10:17 AM

It can be converted to manual. Shelldude did it and ran the car that way. It isn't easy, but it isn't an LS swap either.

dacowgod 12-15-2015 10:24 AM

^^^

LOL .. NO is easy enough to me...

.. will this JDM Nonsense work in an USDM 04-05 Auto then or is it a nice ornament..

I honestly could care less about the engine ... I have no interest in "Making it work" if its significant work I'd just sell it and purchase the proper one.. or fix one of the few that are already here...

My initial intention for these chassis was for 4g63 Swaps into the chassis... I bought this thinking I could make a quick flip of a car this spring and continue funding that other ordeal... shame on me for not digging deeper haha

dannobre 12-15-2015 10:52 AM

I is the same as a USDM 4 port...so it will work well in an 04-05 Automatic

dacowgod 12-15-2015 11:04 AM

Good info... Thanks for the clarificatino.. I will post the engine for sale .. or look for an auto chassis with low compressoin for sale and get something put together so I can make my money back off this flub flub..

Thanks again buddy..

Ricky

RIWWP 12-15-2015 02:03 PM

FYI, don't bother with "JDM" labels. All engines of the same type are the same worldwide. There are no regional differences, only 3 designs total:

Series 1 4-port
Series 1 6-port
Series 2 6-port

And for what engine goes with what car:

2004-2005 4 speed Automatic transmissions (North America): 4-port engine, Series1 design
2004-2008 4 speed Automatic transmissions (Europe): 4-port engine, Series1 design
2006-2008 6 speed Automatic transmissions: 6-port engine, Series1 design (combination was not sold in Europe)
2004-2008 6 speed Manual transmissions: 6-port engine, Series1 design
2004-2008 5 speed Manual transmissions: 4-port engine, Series1 design (combination was not sold in North America)
2009-2012 All transmissions: 6-port engine, Series2 design.

dacowgod 12-16-2015 06:43 AM

Thanks for the clarification .. So this auto engine will help some poor soul make it another oil change or so before it loses compression too ;-) .


All times are GMT -5. The time now is 04:29 PM.


© 2024 MH Sub I, LLC dba Internet Brands