NJ saturday install meets!
So a few of us have been hanging out on the weekends and though we should have saturday install meets. i have a fairly equiped garage and decent space around my neighborhood to host, and i know chrism said he wouldnt mind having them either (heated garage:grouphug:!!!!!)
i was thinking maybe like once a month or something we can host a fairly sized install meet. other then that im in my garage all weekends if anyone needs a hand im somewhat central and chris is north so we can alternate or something to make it convenient for everyone (if thats alright with chris) -benny |
Originally Posted by LiL BenNy
(Post 2768973)
So a few of us have been hanging out on the weekends and though we should have saturday install meets. i have a fairly equiped garage and decent space around my neighborhood to host, and i know chrism said he wouldnt mind having them either (heated garage:grouphug:!!!!!)
i was thinking maybe like once a month or something we can host a fairly sized install meet. other then that im in my garage all weekends if anyone needs a hand im somewhat central and chris is north so we can alternate or something to make it convenient for everyone (if thats alright with chris) -benny but as always, i will be there to install my sway and my under brace, i will give you a call man steven |
Which under brace?
Hey, if you guys are serious, I have a closet that would appreciate your help.... PT sways Evo-R endlinks RB sways Tokico dampers AutoExe F&R 4 point STBs AutoExe Member Brace Set BHR Yukon Coils Exhuast/midpipe/header Nitrous kit SR pulleys umm...and I can't think of the others. Let me know if you guys are down for helping me out on any of these :p |
O and does anyone want a free rear lower arm bar from carbing?
|
^pm'd you
|
i'd come hang out if it was in the central region, not up north. you're in like new brunswickish right?
|
transam kid.. ill help you with them.. just tell me which ones you would take $ for ;) i'd like 1 or 2 of those items from your closet :
|
Originally Posted by Transam kid 01
(Post 2769024)
Which under brace?
Hey, if you guys are serious, I have a closet that would appreciate your help.... PT sways Evo-R endlinks RB sways Tokico dampers AutoExe F&R 4 point STBs AutoExe Member Brace Set BHR Yukon Coils Exhuast/midpipe/header Nitrous kit SR pulleys umm...and I can't think of the others. Let me know if you guys are down for helping me out on any of these :p endlinks? i cant see them being hard if you are doing the sways as well... dampers like shocks?- i can do them, they take a little while but very doable idk what stbs are member brace- just bolt in aslong as fitment is good (i assume) midpipe & exhaust cake. headers? never done em on an 8. coils? as in ignition coils? im pretty sure thats <30min nitrous... idk if i wanna touch but do able..... pulleys- fairly easy if you dont have stock intake dont mind helping you, but no means your mechanic and doing everything lol |
Originally Posted by nvrfalter
(Post 2769302)
i'd come hang out if it was in the central region, not up north. you're in like new brunswickish right?
|
Originally Posted by halimsteven
(Post 2769002)
dude, you have one garage, and chris has one garage too, but both of you use it for your car. if we wanna install something, and it's cold out there, where are we going to install the uprgrage?:uhh:
but as always, i will be there to install my sway and my under brace, i will give you a call man steven being practical, chris' place would be better during the cold, obv he would take his car out of the garage if we need the space but thats IF he allows us to use his garage (not my call, he just threw it up in the air last time we talked about it- chris chime in) |
depending on the day im cool with it...but with the good comes the bad.....i got heat but terrible lighting and no outlets
|
Originally Posted by LiL BenNy
(Post 2769370)
sways- rear are cake, fronts can get tricky ive done em but i struggled a little, chris said he got em in no problem..
endlinks? i cant see them being hard if you are doing the sways as well... dampers like shocks?- i can do them, they take a little while but very doable idk what stbs are member brace- just bolt in aslong as fitment is good (i assume) midpipe & exhaust cake. headers? never done em on an 8. coils? as in ignition coils? im pretty sure thats <30min nitrous... idk if i wanna touch but do able..... pulleys- fairly easy if you dont have stock intake dont mind helping you, but no means your mechanic and doing everything lol The biggest thing I've been trying to figure out is what order to do it all in, that way I don't have to constantly undue things in order to make things fit. |
i'd have to ask my parents if its cool but i have a well-lit 3 car garage
edit: they'd def be fine with it if it was just like 2-4 of us. i dunno if bringing all of 8club over would work hahah |
Originally Posted by nvrfalter
(Post 2769734)
i'd have to ask my parents if its cool but i have a well-lit 3 car garage
edit: they'd def be fine with it if it was just like 2-4 of us. i dunno if bringing all of 8club over would work hahah |
flemington
|
Originally Posted by nvrfalter
(Post 2769734)
i'd have to ask my parents if its cool but i have a well-lit 3 car garage
edit: they'd def be fine with it if it was just like 2-4 of us. i dunno if bringing all of 8club over would work hahah its 8 and 7 club lol........ as for this sat im not 100% sure whats going down, a few people said they wanted to stop by... but everytime people stop by i get nothing done haha... we shall see tho. i NEED my engine bay painted this weekend. |
benny will you be bringing your hot asian friends?
|
Originally Posted by snipaz2420
(Post 2770434)
benny will you be bringing your hot male asian friends?
|
yea you fixed it for what you want
|
Sorry dude.....girls only. But it's okay....you can come out of the closet now haha.
|
Also, I searched the forums a bit and it seems that the carbing bar may have a fitment issue with 3'' piping from an exhaust. Mine is borla (which is 3 in.) and I was wondering if I would have any problems with fitment.
|
Originally Posted by HockeyRX-8
(Post 2770470)
Also, I searched the forums a bit and it seems that the carbing bar may have a fitment issue with 3'' piping from an exhaust. Mine is borla (which is 3 in.) and I was wondering if I would have any problems with fitment.
hot asian friends? i dont really hang out with asians.. theyre a handful.. |
asians are wierd
|
cant have too many in one place
|
haterss
|
All times are GMT -5. The time now is 02:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands