RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Mazmart (https://www.rx8club.com/mazmart-88/)
-   -   Wheel Well Shroud/Plastic pieces (https://www.rx8club.com/mazmart-88/wheel-well-shroud-plastic-pieces-48017/)

Landon_Starr 12-20-2004 03:07 PM

Wheel Well Shroud/Plastic pieces
 
Hey MazMart...

I need the front plastic shrouds around the wheels. Both pieces, front & top/back. Preferably both sides, driver and passenger.

Thanks in advance!

--Landon

Mazmart 12-21-2004 06:36 PM

Landon,
What I've found so far is the left side (Driver's side). $60 plus shipping.
Paul.

Landon_Starr 12-23-2004 12:56 AM

If I were to only purchase one side I'd need the passenger side.

Let me know if you find anything. Price seems reasonable, assuming shipping isn't too steep.

--Landon

Mazmart 12-23-2004 04:05 PM

If I were to find the passenger side would you want it only or both? Just curious.
Paul.

Landon_Starr 12-23-2004 05:29 PM

Judging by the price, I'd say passenger only. I was hoping demand was low enough that picking these up would be relatively cheaper. Don't get me wrong, though, it's still an excellent price, and I'm definitely interested in the passenger side pieces, still.

How much would shipping to 84065, UT be (residential)?

--Landon

Landon_Starr 12-27-2004 04:36 PM

Hey Paul....

Were you able to calculate shipping on the plastic pieces to Utah? (84065)

--Landon

Mazmart 12-28-2004 04:42 PM

Probably about $8. I still don't have the passenger side.
Paul.

Landon_Starr 12-29-2004 11:16 AM

Excellent. I'll keep my eyes on the thread. Feel free to PM me if you find the pieces.

Thanks again, Paul!

--Landon

Landon_Starr 01-10-2005 05:03 PM

Any luck locating this item?

Also, I could be interested in a stock clutch, too, if the price is right. Let me know if you have any laying around.

--Landon

Mazmart 01-10-2005 05:40 PM

I'll let you know something tomorrow Landon.
Paul.

Landon_Starr 01-10-2005 05:43 PM

Thanks Paul!!

--Landon

Landon_Starr 01-11-2005 07:18 PM

Any updates? If nothing on the plastics, how about a clutch disc?

Thanks Paul!

Mazmart 01-11-2005 07:22 PM

A stock clutch disc?

Landon_Starr 01-12-2005 11:01 AM

yep...?

webba_az 01-12-2005 12:39 PM

Paul,

I need to replace these too (they came off when I lost my air dam/diffusor or whatever the hell they call the flat plastic crap under the front bumper).. I need to replace all of this stuff, or at least as much as I need to put on an aftermarket kit.. after you've taken care of Landon, put me on the list for these same items

Mazmart 01-12-2005 05:42 PM

$85 shipped on the clutch disc.
Paul.

Landon_Starr 01-15-2005 06:22 PM

Thanks for the hook-up, Paul! Let me know if you run into the plastic shroud wheel well pieces for the passenger side.

--Landon

Landon_Starr 01-20-2005 06:48 PM

Any update on the plastic wheel well pieces? Passenger...? How bout a passenger headlight? :)

You're awesome, Paul, thanks for putting up with me. :o

--Landon

Mazmart 01-20-2005 07:36 PM

Nothing on the plastic as yet. Remind me, was that lamp halogen or HID?
Paul.
ps Thanks for your kind words. I enjoy dealing with the modern Rotary community. :)

Landon_Starr 01-21-2005 02:06 AM

I have a halogen light, and I only need the passenger side....WITH the black plastic mounting piece with the tabs...don't know how to explain it.

If possible, I'd like the black plastic piece by itself, but as we were discussing, it may not be offered by mazda as a separate part...

Let me know, when you have a minute.

--Landon

Landon_Starr 01-23-2005 06:29 PM

Updates?

--Landon

Mazmart 01-26-2005 05:41 PM

I may be able to provide a new one in the $325 range. Sorry for the delay
Paul.

Landon_Starr 01-26-2005 10:43 PM

No problem. Does this mean obtaining the black plastic piece alone is not an option?

Also, how much would you charge to get the pressure plate that comes with that clutch disk I purchased from you, just in case? :)

--Landon

Mazmart 01-27-2005 07:30 PM

$133 shipped my good man.

Landon_Starr 02-13-2005 06:26 PM

Sorry about the delay in reply. I'm all about that 133 shipped for the headlight ( :) just kiddin. ).

Any news on the plastic shroud pieces?

I won't need the pressure plate, everything went well on the install.

Thanks Paul!

--Landon


All times are GMT -5. The time now is 10:30 AM.


© 2024 MH Sub I, LLC dba Internet Brands