RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Mazmart (https://www.rx8club.com/mazmart-88/)
-   -   RX8 Tune up parts cheap (https://www.rx8club.com/mazmart-88/rx8-tune-up-parts-cheap-212806/)

Mazmart 08-08-2012 08:11 PM

RX8 Coils plugs and wires in stock and cheap
 
Many more sets in stock and ready to ship. I sent some to Canada and some to Sweden today.

Paul.

EricB 08-13-2012 07:22 PM


Originally Posted by Mazmart (Post 4324780)
Many more sets in stock and ready to ship. I sent some to Canada and some to Sweden today.

Paul.

Ordering coils plugs and wires tonight, any chance that it will arrive at Glen Ridge NJ 07028 on the 17th or 18th? Rotorfest (Sevenstock for the east coast) is the 19th and i really wanted to go out, damn CEL.

its throwing P0171,
could be :
coils/plugs/wires (could be, im at 36k miles, 2008 rx8)
vacuum leak (could be, i just removed my intake)
dirty MAF (sure, maybe)
catalytic converter (possibly, but i have not misfired yet)
eccentric shaft postion (i think?)
bad compression (unlikely, but possible)

I have a shitty idle and it drops really low, but doesnt stall. Then sometimes at around 3krpm i get a hiccup. A few days ago before the CEL i got today i was doing canyon runs and getting a hiccup at 7krpm.

Mazmart 08-13-2012 08:10 PM


Originally Posted by EricB (Post 4327713)
Ordering coils plugs and wires tonight, any chance that it will arrive at Glen Ridge NJ 07028 on the 17th or 18th? Rotorfest (Sevenstock for the east coast) is the 19th and i really wanted to go out, damn CEL.

its throwing P0171,
could be :
coils/plugs/wires (could be, im at 36k miles, 2008 rx8)
vacuum leak (could be, i just removed my intake)
dirty MAF (sure, maybe)
catalytic converter (possibly, but i have not misfired yet)
eccentric shaft postion (i think?)
bad compression (unlikely, but possible)

I have a shitty idle and it drops really low, but doesnt stall. Then sometimes at around 3krpm i get a hiccup. A few days ago before the CEL i got today i was doing canyon runs and getting a hiccup at 7krpm.

Could get there as early as the 16th actually.

Paul.

EricB 08-13-2012 08:20 PM


Originally Posted by Mazmart (Post 4327758)
Could get there as early as the 16th actually.

Paul.

Just ordered!!

thanks Paul, hopefully it gets here asap!

EricB 08-18-2012 04:19 PM

Just a quick question that i wasnt able to find looking around a little bit..

ordered new coils plugs and wires, put in the coils, now im doing the spark plugs..

I know the spark plugs with the colored tape are the trailing plugs, but does it matter what wire i connect them to?

I got 4 wires with in the box, and they say "1" "1" "2" "2" on them.

http://mazmart.com/ItemImages/T2_030211%20065.jpg

They are 2 different lengths.

Also i noticed each side has a different color on them..

I know I should match up the lengths of the wires, but which of the two do I use that are the same length??


If im not making any sense....

(i havnt measured the length of the wire yet.. but... lets assume that the wire that connects to the first coil is the longer of the 2)

The wire that attaches to the first coil(most front facing coil?) is labeled 1 or 2?
The wire that attaches to the second coil is labeled 1 or 2?
The wire that attaches to the third coil is labeled 1 or 2?

An answer im looking for would be like....
first coil= long wire #1
second coil=short wire#1
third coil=long wire #2
(obviously the last one is the wire remaining)

ShellDude 08-18-2012 04:25 PM

Hey there Paul,

Noticed these are the "B"s.... N3H1-18-100B ... Any idea when we may be seeing the "C"s states side?

Mazmart 08-18-2012 06:38 PM


Originally Posted by EricB (Post 4331341)
Just a quick question that i wasnt able to find looking around a little bit..

ordered new coils plugs and wires, put in the coils, now im doing the spark plugs..

I know the spark plugs with the colored tape are the trailing plugs, but does it matter what wire i connect them to?

I got 4 wires with in the box, and they say "1" "1" "2" "2" on them.

http://mazmart.com/ItemImages/T2_030211%20065.jpg

They are 2 different lengths.

Also i noticed each side has a different color on them..

I know I should match up the lengths of the wires, but which of the two do I use that are the same length??


If im not making any sense....

(i havnt measured the length of the wire yet.. but... lets assume that the wire that connects to the first coil is the longer of the 2)

The wire that attaches to the first coil(most front facing coil?) is labeled 1 or 2?
The wire that attaches to the second coil is labeled 1 or 2?
The wire that attaches to the third coil is labeled 1 or 2?

An answer im looking for would be like....
first coil= long wire #1
second coil=short wire#1
third coil=long wire #2
(obviously the last one is the wire remaining)

Coil locations: L1,T1,L2,T2 from front to rear
Plug positions: Front housing is 1, Rear housing is 2.
Plugs are marked L and T and the housings have L and T written on them.

Cheat method L for lower, T for Top.

In summary: Both wires marked 1 go front housing with the longer going from the first coil to the bottom plug. The shorter is T1 and goes from the second coil to the upper plug on the front housing. Then you have 2 wires marked 2; the longer is L2 and goes from the 3rd coil to the lower rear plug and the shorter goes from the 4th coil to the rear top plug.

Your required answer was already correct. I gave you the detailed version. :)

Paul.

Mazmart 08-18-2012 06:42 PM


Originally Posted by ShellDude (Post 4331346)
Hey there Paul,

Noticed these are the "B"s.... N3H1-18-100B ... Any idea when we may be seeing the "C"s states side?

Good question.

I will see if I can bring C from Japan as I currently purchase from Mazda in the US and only B is available.

Paul.

ShellDude 08-18-2012 07:41 PM

ty sir!

Coldwound 08-19-2012 03:51 PM

Installed a had the same pause on the wires marked 1 and 2 so I just matched lengths and saw the patterns.

Everything runs perfectly and mazmart will definitely have my future business I'm very pleased with my results.

Mazmart 08-20-2012 11:30 AM


Originally Posted by Coldwound (Post 4331689)
Installed a had the same pause on the wires marked 1 and 2 so I just matched lengths and saw the patterns.

Everything runs perfectly and mazmart will definitely have my future business I'm very pleased with my results.

Very honored to serve you sir.

Paul.

Everest^ 08-20-2012 01:14 PM

How long does OEM coils usually last? I'm thinking of this or upgrading to the BHR kit.

pottsy 08-22-2012 02:09 AM

PM sent

Mazmart 08-22-2012 07:09 AM


Originally Posted by Everest^ (Post 4332299)
How long does OEM coils usually last? I'm thinking of this or upgrading to the BHR kit.

There are many opinions on this. I would say the originals from 04 would be working less then optimally by 60k. Some people change them more often. I don't know if anyone who is using a turbo or supercharger with much boost is staying with OEM. I would imagine the BHR stuff to be one of the better approaches then for sure.

Paul.

rx8boomer 01-03-2013 10:38 AM

Do you guys have a series 2 upgrade starter for 2004 rx8 manual trans !!!

bhryanvii 01-13-2015 02:21 PM

hi just wanted to know if ur still selling these?

Mazmart 01-21-2015 11:28 AM


Originally Posted by bhryanvii (Post 4656177)
hi just wanted to know if ur still selling these?

There are now several ways to do this through us. We allow you to customize:

MAZMART - Serving The Mazda Community Since 1980. 04-11 RX8 Tune Up Kit

MAZMART - Serving The Mazda Community Since 1980. RX8 Ignition

Paul.

Mazmart 01-13-2016 08:48 PM

Prices are even lower
 
It's been a year since we updated here and the prices are improved. We remain best in the US on verified Mazda OEM RX-8 ignition parts.

Browse through these two sections and see which better suits you:

MAZMART - Serving The Mazda Community Since 1980. Ignition

Paul.

Mazmart 06-28-2016 05:12 PM

NEW URL as our site has changed
 
I just noticed this thread has all dead links when you try to find our parts. Please click here to find the ignition parts you seek, at the best prices around.

MAZMART - Serving The Mazda Community Since 1980. RX8 Ignition

Paul.

Mazmart 10-06-2016 03:43 PM

Cheaper but quicker
 
On our site you will notice we have the option for coils from Japan with SLOW shipping. Please note that I often stock them so you don't always have to wait. A few are in stock now, so take advantage of the lower pricing.

MAZMART - Serving The Mazda Community Since 1980. RX8 Ignition

Paul.

Mazmart 12-03-2016 06:33 PM

EVEN LOWER PRICES for your RX-8
 
We've done it again. Our prices have been dropped again. We strive to offer the lowest prices around for the correct factory parts and we're pleased to offer these new rates.

Check it out: MAZMART - Serving The Mazda Community Since 1980. RX8 Ignition

Paul.

CelestialGryphon 12-05-2016 09:49 AM

I gotta hit you up about a fuel pump!

Mazmart 12-05-2016 12:17 PM


Originally Posted by CelestialGryphon (Post 4794869)
I gotta hit you up about a fuel pump!

Message me this week for an unusual price on a new factory pump.

Paul.


All times are GMT -5. The time now is 04:07 AM.


© 2024 MH Sub I, LLC dba Internet Brands