Possible bring-your-mods day
Soon I have few things to do to my car maintenance wise (diff/tranny/oil fluid changes) and was thinking if anyone else needed any help with small mods Id be willing to help and/or lend tools. I have 2 jacks, some jackstands, and all sockets needed for any job (no impact wrench unfortunatly).
I'm thinking I will do this within the next few weeks if there seems to be a warm day coming up. Any interest? Install Ideas: -intake -exhaust (if bolts have been loosened previously. If not, I don't have the means to take off a age-welded bolt) -suspension work excluding aftermarket springs on struts (too much of a PITA to do anymore) -gauges -brake caliper painting -expanding oil venting -removing vfad -short shifter -any fluid changes -any light bulb changes -any maintence stuff like cabin air filter or engine air filter let me know guys :) |
I need to do my decarb, change spark plugs/coils, and install a cat back im buying from 9krpm. im up to help with ANYTHING. i love experience and working on 8s.
i know how to install-- intake midpipe body kits suspension |
i can do regular maintenance pretty much....rotors, brakes, spark plugs, oil change, couple of other things....I'm hoping to buy my springs so I will finally be lowered:shocking:
|
Originally Posted by phrenetiK
(Post 3846546)
I need to do my decarb, change spark plugs/coils, and install a cat back im buying from 9krpm. im up to help with ANYTHING. i love experience and working on 8s.
i know how to install-- intake midpipe body kits suspension
Originally Posted by unknown__Disciple
(Post 3846568)
i can do regular maintenance pretty much....rotors, brakes, spark plugs, oil change, couple of other things....I'm hoping to buy my springs so I will finally be lowered:shocking:
|
If this is in a few weeks I should be able to come out!
I can do bolt on mods/suspension/coils/sparks...etc Let us know Ross :) |
I need to clean the engine with the foam agent thing, also maybe paint the calipers.
-let me know when you want to do this. preferably in a mild day. |
Originally Posted by Sifu
(Post 3847159)
If this is in a few weeks I should be able to come out!
I can do bolt on mods/suspension/coils/sparks...etc Let us know Ross :)
Originally Posted by SPHINX144
(Post 3847192)
I need to clean the engine with the foam agent thing, also maybe paint the calipers.
-let me know when you want to do this. preferably in a mild day. For the caliper paint, you can pick some up at AutoZone I believe (same for Seafoam ($10). They usually have blue, red, black, or silver in stock for $15 or 20 IIRC. |
If your going to paint the calipers you should do it right. www.G2USA.com they have high heat paint, that is incredibly durable. Also its probably going to be to cold to paint them, I think it says it should be at least 70 degrees but I would have to check the box I have at home.
|
It's this brand: http://www.autozone.com/autozone/acc...er=539677_0_0_
|
I used this on my 8 and if you want go ahead and look at my photos to see how it turned out. This stuff turns to rock, and is very durable. It coats on thick to so its very resiliant but smooth. I have photos if you wanna see how it turned out just click on my sig and goto brake caliper painting album.
http://www.g2usa.com/Merchant2/merch...roduct_Code=G2 CAUTION: Only open cans immediately before use. Apply and use product only in dust-free, well-ventilated area. Working temperature must be between 56 - 70 degrees. Once mixed, the G2 Brake Caliper PaintSystem cannot be stored and must be used immediately - once mixed, there are only between 4-6hrs working time with the paint depending on ambient temperature. Plan the application process accordingly. Also, brake dust may contain asbestos. Wear safety clothing and a face mask while cleaning calipers. |
Looks good man, the Duplicolor also works and looks very good and it's cheaper too by over $20. I painted mine about 2 years ago and they're just now starting to fade if you look real close.
|
I have some race ramps for the height challenged people. I can help with pretty much any of the installs as well. Someone bring the strength of he-man and put the midpipe on my car.
|
Originally Posted by j8635621
(Post 3849399)
I have some race ramps for the height challenged people. I can help with pretty much any of the installs as well. Someone bring the strength of he-man and put the midpipe on my car.
|
Ross Dawgs Driveway?
|
:rofl: I stole the idea from someone
|
Must've been a genius. :suspect:
|
Mebbeh :suspect:
|
Originally Posted by Ross_Dawg
(Post 3849531)
I have a breaker bar, but my sockets are 12 point, not 6 point so it will strip. If you were to have a 6pt 14mm socket we could probably get it on :icon5:
|
putting on my midpipe took like an hour and i broke the old bolts, but bhr sent new ones anyways
|
Originally Posted by j8635621
(Post 3849594)
Damn I don't know if I can swing buying a socket. Let me go whore myself out by the Fiesta brb.
|
yeah i might buy a intake soon as well as spark plugs, so i can go put those on..also i got half a can of that mazda engine cleaner for the 8 if anyone wants 2 use it, it worked pretty good and i have the whole process to do it memorized already..so anyone can have that
|
Oh yeah I have some leftover Seafoam as well if anyone needs it.
|
i was gonna sell it but i dont wanna be a douch..lol..ill just give it away..lol..and yall spark plug nerd need to help me change mine, ive never changed them in the 8 before..lol..and any recomendation on a type of plugs?
|
Ngk from bhr. It's simple simple to install an intake and plugs/coils.
|
cool, ill probably get those then..dont they sell those in like autozone and crap 2?
|
All times are GMT -5. The time now is 06:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands