|
Oklahoma Rotary Group
Everyone in oklahoma join up! meets/minimeets/Events!
stick together. https://www.facebook.com/groups/OKRotary/ https://sphotos-a.xx.fbcdn.net/hphot...34277624_n.jpg https://sphotos-a.xx.fbcdn.net/hphot...59804864_n.jpg https://sphotos-b.xx.fbcdn.net/hphot...12379403_n.jpg https://sphotos-b.xx.fbcdn.net/hphot...47256479_n.jpg https://sphotos-b.xx.fbcdn.net/hphot...91634452_n.jpg https://sphotos-a.xx.fbcdn.net/hphot...22050607_n.jpg |
Oklahoma FTW. I would love my 8 on some back country roads!
|
Originally Posted by inTEGrate89
(Post 4418111)
Oklahoma FTW. I would love my 8 on some back country roads!
|
some new video's up!
|
Got some new stuff in the group. parts deals & meets coming up. if you're in Oklahoma Join up!
|
|
I justjoined the facebook group hoping to meet some cool people and chill
|
Hey guys, I'm in Wichita Falls, TX for a while on military TDY. I want to Seafoam my engine, but I've never done it before and I don't want to do it 'unsupervised' lol. Is there anyone that would be willing to come down here and help me out? I'd get you lunch or something and fill up your gas tank? Or if you have a better place to do it, I can maybe head up there, if I can wiggle out of some military stuff. Also, FYI, my 8 is in the shop right now so this would be in a little while (few weeks ish). Thanks guys. :)
|
Hello!
Originally Posted by dancingdan42
(Post 4511156)
Hey guys, I'm in Wichita Falls, TX for a while on military TDY. I want to Seafoam my engine, but I've never done it before and I don't want to do it 'unsupervised' lol. Is there anyone that would be willing to come down here and help me out? I'd get you lunch or something and fill up your gas tank? Or if you have a better place to do it, I can maybe head up there, if I can wiggle out of some military stuff. Also, FYI, my 8 is in the shop right now so this would be in a little while (few weeks ish). Thanks guys. :)
hey! sorry i just saw this. Join this group if you're not already in it and if you have facebook! there's some guys IN Wichita falls! they should be able to help you out. however if you have high miles and have not done Seafoam we've seen some Possible bad from dislodging Large chunks of carbon/gunk https://www.facebook.com/groups/NorthTexasRotary JOIN UP! :) |
Originally Posted by linuxadickt
(Post 4513578)
hey! sorry i just saw this. Join this group if you're not already in it and if you have facebook! there's some guys IN Wichita falls! they should be able to help you out. however if you have high miles and have not done Seafoam we've seen some Possible bad from dislodging Large chunks of carbon/gunk https://www.facebook.com/groups/NorthTexasRotary JOIN UP! :) |
Yeah probably should be fine. You just put half bottle in each service port on the passenrgee side of the lower intake manifold. There should be a nipple Cap covering each one.
Easiest way is to take air box out and disconnect the eshaft sensor right on edge of main pulley once you take airbox out and then the car won't start but it'll still suck seafoam out if the can. i ususally just use a length of vac hose on the nipple then into can like a straw. If you need gelp finding the eshaft sensor lemme know |
Originally Posted by linuxadickt
(Post 4513674)
Yeah probably should be fine. You just put half bottle in each service port on the passenrgee side of the lower intake manifold. There should be a nipple Cap covering each one.
Easiest way is to take air box out and disconnect the eshaft sensor right on edge of main pulley once you take airbox out and then the car won't start but it'll still suck seafoam out if the can. i ususally just use a length of vac hose on the nipple then into can like a straw. If you need gelp finding the eshaft sensor lemme know |
Originally Posted by dancingdan42
(Post 4513675)
I watched a video and the guy that did it was running the car to suck it into the manifold. So that's not needed?
If your car is manual trans you can pull that vac line that goes from brake booster to upper intake manifold. If you do that I would do 1/3rd in there, 1/3d in each service port. (Start with brake booster) Wait 20-30 mins and start. Itlll smoke like crazy. Just keep it idling for awhile and once smoke gets a little thinner you can start revving a bit or take it for a smokey spirited drive lol Also know sometimes if you have a cat, it can clog it from carbon and seafoam liquid/smoke passing through it. Also also you need to change plugs promptly after the smoke stops. The carbon the seafoam dislodges fouls them. Since your replacing the plugs too if you've never done ignition coils it wouldn't hurt to do those either. I think its O'Riley's that has one that has 100k mile warranty and that will be your saving grace because they take a shit every 15k or less lol Sorry for the novel. You should really get a Facebook even if just for the group. I barely use mine for anything but rotary stuff now! We have meets, Texas does too! we have Oklahoma and Texas rotary decals and shirts up here! |
Having a meet Feb 6th! come hang out and eat with us!
https://www.facebook.com/events/101107183607511/ |
If your looking for some great back roads I live in Tuttle and there are some amazing old pretty smooth highways around here. Tuttle to Chickasha to Blanchard is one of my favorites or to mince and then on to binger. Great view and really scenic although that one the road is a little rough. Anyone interested would love to get a whole bunch of 8s in on a backroad type all day cruise.
|
Someone in Okc who can install apex seals
Does anyone no a shop in okc that knows how to replace apex seals in an 04 rx8?
|
Originally Posted by Aj Ward
(Post 4808930)
Does anyone no a shop in okc that knows how to replace apex seals in an 04 rx8?
have you joined the group? Search for Oklahoma rotary enthusiasts on Facebook if you have it and I'll add you and shoot you a message |
| All times are GMT -5. The time now is 04:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands