RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   General Automotive (https://www.rx8club.com/general-automotive-49/)
-   -   Mazda TAKERI to Bow at 2011 Tokyo Motor Show (https://www.rx8club.com/general-automotive-49/mazda-takeri-bow-2011-tokyo-motor-show-224673/)

9krpmrx8 10-25-2011 02:32 PM

Yeah i could see daily driving this.

Spin9k 10-25-2011 03:17 PM

It's really attractive from certain angles, as here ...


https://www.rx8club.com/attachment.p...9&d=1319520421


but there is feet of front overhang here ... the door is almost as wide as the overhang beyond the front wheel....just euuuuwww :tear:


https://www.rx8club.com/attachment.p...8&d=1319520421


and I'm seeing way too much Nissan-clone all over the bulbous front end here ... needs to be toned down more than a little.


https://www.rx8club.com/attachment.p...7&d=1319520421


The interior is refreshing... I'm glad to see what appears to be going away from the awful expanse of hard plastic dash material in the 3 that's right there up and in your face and in the way of outward vision. This looks blessedly clean, simple, and elegant.


https://www.rx8club.com/attachment.p...1&d=1319523183

pking1122 10-25-2011 06:55 PM

Anyone else notice the 1.3 liter Sky engine mentioned in the original post? :evil_laug

77mjd 10-25-2011 07:53 PM

so once again...nothing rotary related? DAMMIT!!!!!!!!!!!!!!!:mad:

jim123321 10-25-2011 08:23 PM


Originally Posted by 77mjd (Post 4110406)
so once again...nothing rotary related? DAMMIT!!!!!!!!!!!!!!!:mad:

:mad::mad::mad::mad::mad::mad::mad::mad::mad::mad: :mad::mad::mad::mad::mad::mad::mad::mad::mad::mad: :mad::mad::mad:

8 Maniac 10-25-2011 09:42 PM


Originally Posted by Spin9k (Post 4110237)
The interior is refreshing... I'm glad to see what appears to be going away from the awful expanse of hard plastic dash material in the 3 that's right there up and in your face and in the way of outward vision. This looks blessedly clean, simple, and elegant.

Honestly, the interior is probably going to see a lot more changes than the exterior if this car becomes a production model. The overall general design might stay similar, but materials and the details of many things will change quite a bit. If it does come out looking like that, I would be rather impressed.


Originally Posted by pking1122 (Post 4110364)
Anyone else notice the 1.3 liter Sky engine mentioned in the original post? :evil_laug

That's just an engine exhibit showing the 1.3L engine used in the demio (mazda 2)... hope you weren't getting excited about a sky rotary.

RMXG8 10-25-2011 11:57 PM

seksi!!!!!!

pking1122 10-26-2011 12:02 AM


Originally Posted by 8 Maniac (Post 4110463)
Honestly, the interior is probably going to see a lot more changes than the exterior if this car becomes a production model. The overall general design might stay similar, but materials and the details of many things will change quite a bit. If it does come out looking like that, I would be rather impressed.



That's just an engine exhibit showing the 1.3L engine used in the demio (mazda 2)... hope you weren't getting excited about a sky rotary.

I honestly didn't know they had a 1.3 liter piston. Hell, they should stick the 2.0 Sky G in the 2, and give it some balls. But then again, the 1.3 will probably get 50mpg on the highway.

YaXMaN 10-26-2011 12:21 AM


Originally Posted by 8 Maniac (Post 4110463)
Honestly, the interior is probably going to see a lot more changes than the exterior if this car becomes a production model. The overall general design might stay similar, but materials and the details of many things will change quite a bit. If it does come out looking like that, I would be rather impressed.

^Yep
Quoting R&T
"The tiny side mirrors and high-tech cabin are the only true dream car touches on the Takeri. Take those away and you’re pretty much looking at the next Mazda6."

That car is drop dead gorgeous. You guys complaining about the front overhang are nucking futs. It's one of the distinctive styling elements that makes the proportions on that car look so fantastic.

Gorgeous. Unbelievably gorgeous.

8 Maniac 10-26-2011 01:10 AM


Originally Posted by pking1122 (Post 4110540)
I honestly didn't know they had a 1.3 liter piston. Hell, they should stick the 2.0 Sky G in the 2, and give it some balls. But then again, the 1.3 will probably get 50mpg on the highway.

A lot of people had a similar reaction when it was first mentioned... I think it's tough for us rotary fans to see 1.3L and not assume it's a rotary engine. You hit the nail on the head... it does get around 50 mpg if I remember correctly.


Originally Posted by YaXMaN (Post 4110546)
^Yep
Quoting R&T
"The tiny side mirrors and high-tech cabin are the only true dream car touches on the Takeri. Take those away and you’re pretty much looking at the next Mazda6."

That car is drop dead gorgeous. You guys complaining about the front overhang are nucking futs. It's one of the distinctive styling elements that makes the proportions on that car look so fantastic.

Gorgeous. Unbelievably gorgeous.

Exactly. I honestly think it's a good thing. There are a lot of design elements that would look great if they made it into the production model, but I think it's a bit over the top as a whole. Plus, some of it looks a little less than convenient for actual functionality. I definitely hope they take some of the styling cues from that interior though... there are some really great details in there.

I think it does look just a touch too long, but I didn't notice it until someone pointed it out. I think just a very little bit shorter might look better, though I definitely don't think it looks bad in its current form. I'd have to see actual photos of it to be sure though. If they produce a car that looks anything like that, I'd definitely be interested.

MattMPS 10-26-2011 01:38 AM


Originally Posted by pking1122 (Post 4110364)
Anyone else notice the 1.3 liter Sky engine mentioned in the original post? :evil_laug

The Skyactiv1.3 is in exposition as tech exhibit but not related to Takeri. Takeri is mounting the 2.2 Skyactiv diesel. is clearly written.

foo77 10-26-2011 03:21 AM

i don't see so much different than Shinari.. seem Mazda used to make all model same design.. i guess this goes for Mazda 3 as they quote midsize sedan concept car and Shinari probably for Mazda 6..

ps; don't expect a new rotary car guys, maybe they might show us the final limited edition Mazda RX8 Spirit R..

8 Maniac 10-26-2011 04:16 AM


Originally Posted by foo77 (Post 4110586)
i don't see so much different than Shinari.. seem Mazda used to make all model same design.. i guess this goes for Mazda 3 as they quote midsize sedan concept car and Shinari probably for Mazda 6..

ps; don't expect a new rotary car guys, maybe they might show us the final limited edition Mazda RX8 Spirit R..

You have very little attention to detail if you dont see much of a difference from the Shinari. The design posted in this thread is likely to be the Mazda 6. The 6 is considered a mid-sized sedan, so it would make sense. The Shinari is a concept car to show their new design direction, which is why you'll see a lot of cars with similar design details as the Shinari. Most companies follow a similar design scheme for cars produced in the same time period, so it's not just Mazda.

foo77 10-26-2011 04:50 AM

good point.. its still a concept car, idk if they might produce it seem they used to show us concept cars several times but in the end, you guys know better about it, just my thought...

Spin9k 10-26-2011 10:52 AM

2 Attachment(s)

Originally Posted by YaXMaN (Post 4110546)
^Yep
That car is drop dead gorgeous. You guys complaining about the front overhang are nucking futs. It's one of the distinctive styling elements that makes the proportions on that car look so fantastic.

Gorgeous. Unbelievably gorgeous.

Guess it depend whether you dig cars with styling like this

Attachment 239927

or this

Attachment 239928

zoom44 10-26-2011 10:53 AM


Spin9k 10-26-2011 11:04 AM

...ah soo...tailpipe snifing looks like fun! I didn't get much from the rest of it... translation?

Easy_E1 10-26-2011 11:18 AM


Originally Posted by Poop (Post 4109709)
The list didnt include the next-gen mx-5. I thought it will be revealed as well? or did i miss it..... :(


Originally Posted by Mazmart (Post 4109797)
Mazda has not indicated that the next MX-5 will be shown as yet (Although people have hoped for it). The 6 was next in line. I do think the MX-5 comes prior to the next gen 3 though.

Paul.

They do mention showing a "Roadster". I would say that is a Miata/MX5. Now what year and design is it? Don't know.

ASH8 10-26-2011 03:49 PM


Originally Posted by 77mjd (Post 4110406)
so once again...nothing rotary related? DAMMIT!!!!!!!!!!!!!!!:mad:

That's not going to happen anytime soon..if ever.:tear:
Particularly when they have just announced the Spirit R RX-8 and 1000 units.

Any sign of a new Rotary would kill these sales.

pking1122 10-26-2011 05:23 PM


Originally Posted by ASH8 (Post 4111015)
That's not going to happen anytime soon..if ever.:tear:
Particularly when they have just announced the Spirit R RX-8 and 1000 units.

Any sign of a new Rotary would kill these sales.

Not necessarily. 1000 models is limited enough to appeal exclusively to collectors in Japan. That's the only market it's going to be offered in anyway.

pking1122 10-26-2011 05:26 PM


Originally Posted by Spin9k (Post 4110777)

I think the over hang in the shot of the Mazda 6 (yeah I said it) is an illusion. It's a rendering, and a semi-quarter angle. There isn't much depth on that foremost edge. In every other angle, it appears to be short. Does anybody thing the tail is Sonataish?

ASH8 10-26-2011 08:50 PM


Originally Posted by pking1122 (Post 4111062)
Not necessarily. 1000 models is limited enough to appeal exclusively to collectors in Japan. That's the only market it's going to be offered in anyway.

Mazda Australia are looking into getting a few here ...

Mazmart 10-28-2011 09:17 PM

The most detailed images yet.

http://www.youtube.com/watch?v=rmelXVS73u4

Paul.

pking1122 10-29-2011 10:08 PM


Originally Posted by Mazmart (Post 4112793)
The most detailed images yet.

http://www.youtube.com/watch?v=rmelXVS73u4

Paul.

The live views look even better than the renderings. Very attractive. Although, I hope they keep the metallic grill outline intact for the production model this time. I was sad to see that go in the CX-5.

9krpmrx8 10-29-2011 10:54 PM

Anyone else notice the rotor spinning on the screen of the CX-5? :)


All times are GMT -5. The time now is 02:46 PM.


© 2024 MH Sub I, LLC dba Internet Brands