|
RPM Motorsports Grand Opening - Saturday May 5th
Hey everyone,
Me (Joe) and Dan are inviting everyone to the new shop location for our "Grand Opening" on Saturday May 5th from 10am-until when ever everyone leaves! We will be BBQ'ing some burgers and hot dogs in the afternoon and anyone is more than welcome to stop by, hang out, talk rotary, check out some of the projects we have going on and maybe learn a few things Let me know here if you can make it so I know how many burgers to get. Hope you can make it! Heres the address: 250 Woolwich St S Unit #12 Breslau Ont N0B 1M0 Our shop is on the south side of the building, just look for the RX-7's outside |
Originally Posted by R.P.M.
Hey everyone,
Me (Joe) and Dan are inviting everyone to the new shop location for our "Grand Opening" on Saturday May 5th from 10am-until when ever everyone leaves! We will be BBQ'ing some burgers and hot dogs in the afternoon and anyone is more than welcome to stop by, hang out, talk rotary, check out some of the projects we have going on and maybe learn a few things Let me know here if you can make it so I know how many burgers to get. Hope you can make it! Heres the address: 250 Woolwich St S Unit #12 Breslau Ont N0B 1M0 Our shop is on the south side of the building, just look for the RX-7's outside lol. |
Awesome .. I'm in
|
Nice! I'm glad that maybe a couple 8 owners will come out!
I hope my 8 will be back from the body shop that day. |
How 'bout a club drive out there??? Somebody, find a nice route!
|
I'm in Orangeville, I'm sure I can find some nice twisties.
|
How about we meet up on Hyw 401 at Tim Hortons Mississauga Rd. between 9:00am and 9:30am
There's a big parking lot. 6880 Financial Dr Mississauga,ON L5N 6Y5 CA To Tim's from 401 Take exit 336 for Mississauga Rd/RR-1 toward Erin Mills Pkwy Turn right at Mississauga Rd Turn right at Royal Bank Dr Turn left at Syntex Ct Turn right at Financial Dr Directions to the shop HWY-401 W toward London Take exit 278 for HWY-8 toward Cambridge/Kitchener/Waterloo Keep right at the fork, follow signs for HWY-8 W/Kitchener/Waterloo and merge onto HWY-8 W/King St Bypass Take the exit toward Sportsworld D Turn right toward Sportsworld Dr Turn left at Sportsworld Dr Continue on Maple Grove Rd Turn left at Fountain St N Turn left at Woolwich St S Anyone interested? |
i am for sure=)
|
I'm marking it down. Can't wait!
|
That sounds like a plan Darkbrew!
I'll see about getting some local RX-7 guys to make the trip up... |
I'm in! Sure beats bowling!
|
We should have the old SpeedMachine Silver Bullet FC back from the body shop with the new half bridge Cosmo RE I built for it at the shop that day too.
http://i33.photobucket.com/albums/d86/RPM-1/pics019.jpg Make sure your cars are shined up too....there may be a camera crew show up to film for a DVD :) |
woo noo...damn that FC is almost complete eh....saw it at the saw when i went...pretty cool!
dammit it...even if we shine it up its gonna be a dusty drive the whole way....sux.. |
Hey Joe I spoken with my friend and we'll try to make it...and this time we'll be with my 8. :wiggle:
|
Nice Frank! It'd be great if you came down!
|
Yes and could talk about that 20B.....hehe my friend wants to put it in his FB RX-7... :eek:
|
Nice! That would a monster! Definatly a cool swap....we are in the process of fabricating a front bolt-in subframe for the FB that would allow rack and pinion steering and the use of 2nd gen motor mounts. I'd have to show you what I mean if you make the trip down!
|
So, who is meeting at Tim's for the convoy to RPM?
https://www.rx8club.com/showpost.php...39&postcount=7 Weekend weather |
dammit..i want to come..but i have work until 7pm that day!!
|
I was planning to cruise up with my fellow Rotary brothers... alas, other plans have come up.
My little cousin is having his first communion that day and I'm required to attend. I hope someone takes alot of pics! :( Lates, |
Originally Posted by R.P.M.
Nice! That would a monster! Definatly a cool swap....we are in the process of fabricating a front bolt-in subframe for the FB that would allow rack and pinion steering and the use of 2nd gen motor mounts. I'd have to show you what I mean if you make the trip down!
|
just wondering if you guys do any suspension mods. I'm looking for struts and springs, probably Koni struts and Tein springs. Thanks
|
Frank, I'll have to check out some places when I'm back at the shop tomorrow and I'll message you thier info.
red8gt, we do everything! We can get you almost any type of suspention parts you need and install it and then have the car aligned for you. (Theres an alignment shop behind ours) |
Damn...can't come, Wonderland tix for the family, supposedly the wife told me about it...guess I should listen to her more often. Too bad, weather is looking great, have fun guys. This is the type of event that we should do more often.
|
Pulled the car out of winter storage :ylsuper: !!!!
I will be there on Saturday. Is it still 0900 at Tims 2005 VR GT, Red Strakes, Clear Corners, Red Calipers |
|
Okay I'm still going however I'm not going to be meeting you peeps at Hortons. I would however like to know roughly what time you guys think you'll be arriving at the shop?
|
The directions say 51 minutes from Tim's to the shop. If we depart on time at 9:30 we should arrive at 10:21
|
Gotcha Thanks
Sorry I didn't click deep enuf into the links, just clicked the first one bringing me too your single post. Didn't realize at first that the title "Directions to Shop" was a link. See you guys around 10:30am at the shop then Tnx again Brew |
Big turn out!
What a turn out at Tims!!
http://img502.imageshack.us/img502/1...2224ex3.th.jpg All Solstice and sky drivers. :( At the shop http://img58.imageshack.us/img58/708...2248ow6.th.jpg More turned up later. In the shop http://img369.imageshack.us/img369/4...2239wg7.th.jpg Race car project http://img382.imageshack.us/img382/8...2234xb9.th.jpghttp://img369.imageshack.us/img369/2...2235pq2.th.jpg More pictures later |
And again Congrats to your shop Joe & Dan:) and we were really happy to attend to your grand openning.
Luc gave me a hard time during our trip back to Quebec:spank: ....he kept talking about that engine....and I might consider moving to that option:rolleyes: and by the way we decided to go back home the same day...so I was home at midnight. Frank |
Are we gonna see the movie of the running engine from the race car, I told that to my son and he want to see it :)
|
Hey! Thanks for everyone who could make it out for the day! It was an awesome turnout and it was great to talk to some new faces!
I'll see if Aaron Cake has the video of the FC racecar running....hopefully he can post it up. |
Here are the videos of the race car. Thanks to Aaron Cake for uploading them
http://www.youtube.com/watch?v=DKaoxJ7dCzw http://www.youtube.com/watch?v=Y4Eme4GGXwA http://www.youtube.com/watch?v=xk1yertKjfk |
Awwwsomme......:smoker: :rock:
|
Oooh man! Those are some lumpy cams! ;)
|
Originally Posted by qtwre
(Post 1870054)
Oooh man! Those are some lumpy cams! ;)
I like the oil smoke screen myself. By design? Looks like the turbo would be an awesome veggie chopper - can you feed in a cabbage and get coleslaw out the back? |
JOe send me the link to your new website.
Jose |
|
Yeah our website hasn't been updated in over a year.
Too busy working on cars to sit down and get a good layout going yet....soon though. BTW Jose, I'm sending you a pm right now. Good to hear from you again! |
^ should get some text on the site. Your one big image can't be found by search engines
|
| All times are GMT -5. The time now is 10:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands