Black RX-8 Mini-Me
#1
Mmmmm... Rotary Donut
Thread Starter
Join Date: Nov 2003
Location: Lake in the Hills, IL (NW Chicago Burbs)
Posts: 2,376
Likes: 0
Received 4 Likes
on
2 Posts
Black RX-8 Mini-Me
My autoart 1/18 finally showed up after some eBay hassles with a nimrod. It took about .04 seconds for my 5 year old to shove a polly pocket in it and start singing the Zoom Zoom song... these kids are definitely going to be enthusiasts : )
Anyway, here's a quick pic of my mini 8:
Anyway, here's a quick pic of my mini 8:
#2
Moderator with a mycocardium
Nice Mini you. I've got one in Red. Hint: Whatch the mirrors and the rear glass side windows, they are prone to be removed accidetally. Also, if you can figure out how to get the body off, let everyone know with a DIY. I can only get the front end loose enough to pull it up to see the full engine. I am looking to do some mods with it but it is proving difficult to take apart very far. There are screws behind each license plate. Also, what about that front plate?? It comes off but there is a part behind it that goes through the grille. I have some ideas about how to fill the hole. One last thing, MGuirs NXT makes it shine!
P.S. You've got to slow down on your posts, I'll never catch up!
P.S. You've got to slow down on your posts, I'll never catch up!
#3
Mmmmm... Rotary Donut
Thread Starter
Join Date: Nov 2003
Location: Lake in the Hills, IL (NW Chicago Burbs)
Posts: 2,376
Likes: 0
Received 4 Likes
on
2 Posts
Originally posted by D MENAC 7
Nice Mini you. I've got one in Red. Hint: Whatch the mirrors and the rear glass side windows, they are prone to be removed accidetally. Also, if you can figure out how to get the body off, let everyone know with a DIY. I can only get the front end loose enough to pull it up to see the full engine. I am looking to do some mods with it but it is proving difficult to take apart very far. There are screws behind each license plate. Also, what about that front plate?? It comes off but there is a part behind it that goes through the grille. I have some ideas about how to fill the hole. One last thing, MGuirs NXT makes it shine!
P.S. You've got to slow down on your posts, I'll never catch up!
Nice Mini you. I've got one in Red. Hint: Whatch the mirrors and the rear glass side windows, they are prone to be removed accidetally. Also, if you can figure out how to get the body off, let everyone know with a DIY. I can only get the front end loose enough to pull it up to see the full engine. I am looking to do some mods with it but it is proving difficult to take apart very far. There are screws behind each license plate. Also, what about that front plate?? It comes off but there is a part behind it that goes through the grille. I have some ideas about how to fill the hole. One last thing, MGuirs NXT makes it shine!
P.S. You've got to slow down on your posts, I'll never catch up!
#7
Moderator with a mycocardium
Originally posted by G8rboy
I plan on NXT'ing it tomorrow. I'm suprised you haven't found a way to work a little LED into the 3rd brake light for a certain mod...
I plan on NXT'ing it tomorrow. I'm suprised you haven't found a way to work a little LED into the 3rd brake light for a certain mod...
#8
Bert angry!
Join Date: Aug 2003
Location: Madison, WI
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
You guys inspired me to order my own Mini RX-8. I can't wait to get it. I just have to figure out how to mount a Borla exhaust on it. If only I could get a 1/32 slot car version too.
Thread
Thread Starter
Forum
Replies
Last Post
Jazzmeson
RX-8 Parts For Sale/Wanted
1
08-30-2015 02:23 AM