You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join RX8Club.com today!
Question... does your front seem a little bit higher than your rear ?? I just got my springs installed like a week ago and i just recently got them preloaded but my fronts are stiill a tiny bit higher than my rear.
__________________ | Full OEM Appearance Package | Tints | Front & Rear Rotary Accent | Clear Corners | AEM CAI | Exoticspeed Cat Back Exhaust | Ichiba Spacers | Yellow Tinted Fogs | Lebren Rear Rotary Light | Full exterior LED conversion | Interior LEDs | Tanabe Gf210| Yellow Top Battery | Project KIcs R40 Lug Nuts | BHR Midpipe |
Your 8 looks good Fisher! I think that's how the R3's should come stock!
I have a pair of ichiba's too. Good product, but i recommend using beefier acorn nuts when mounting them. I didn't trust the tiny ones they came with & they are easy to strip haha.
hehe ya the lug nuts well those a cheap openended ones the place i got the spaces from sent 1 set with longer studs so i couldnt use oem lugs i am getting new ones tomorrow ill take a pic with the new lugs.
its a trust/ greddy u can only order it from japan, greddy usa says they still need to make it / fit it to the North american market ... looks like its made and fits to me
fyi i got it through japanparts nothing but good things to say about them
Rotaryrx8,
I told u! Cut the front ones by one coil. I promise that it will lower the front by only about 1/4 inch and make it lower than the front. It wont change the ride or the dynamics of the springs.
Quote:
Originally Posted by Rotary-RX8
i just got tanabe gf210 springs installed too lol
I have ichiba spacers too.
Question... does your front seem a little bit higher than your rear ?? I just got my springs installed like a week ago and i just recently got them preloaded but my fronts are stiill a tiny bit higher than my rear.
Rotaryrx8,
I told u! Cut the front ones by one coil. I promise that it will lower the front by only about 1/4 inch and make it lower than the front. It wont change the ride or the dynamics of the springs.
No need to spread your **** throughout the forum. No one cares to hear it. Keep it to pm's.
Also, don't hi-jack this QUALITY thread with your ricer fail. The OP is doing things the correct way.
Could you go with bigger spacers? Do you think the Ichiba 22mm spacers work for the rears without rolling the fenders?
__________________
10' R3 velocity red- Turbo XS CBE, Dewalled airbox, 30% tint on all windows, Racing Beat intake duct, Tein S Tech springs, K&N drop in filter, Hotchkis sway bars
it looks like 22mm should fit no problem i kinda wish i got the bigger ones
and ill get some pic this week of the fron lip up ... got to wash the car heheh
Do you think the 22mm would work for the front aswell?
__________________
10' R3 velocity red- Turbo XS CBE, Dewalled airbox, 30% tint on all windows, Racing Beat intake duct, Tein S Tech springs, K&N drop in filter, Hotchkis sway bars
Really liking that lip...too bad it only fits the R3 bumper ... they need to make a solid lip for the non-r3s
There is one...the Knight Sports lip is for our non-R3 bumpers. However, they're only available in FRP or CF...so say goodbye the first time something flies up on the highway :/. Hopefully Paul has some luck on R3 bumpers for us.
Fisher - can I steal that SBM front bumper? hahaha....you Canadians got lucky, since you got that color on the R3s! IIRC, you got white R3s as well, right? She's looking good. Any plans for aftermarket wheels, or are you just going to keep the BBSs long term?
... they need to make a solid lip for the non-r3s
Linear Mode
