Lowered? What are your measurements?
#1
Lowered? What are your measurements?
Just wondering what everyones measurements are on the S2's if you have lowered your car.
(measured from center of wheel, straight up to fender, on "level" ground)
FL: 12.5 FR:12.5
RL: 14.0 RR: 14.0
Trust me, I spent forever trying to equalize measurements, and then had the shop put the finishing touches when he threw it on the lift lol.
Curious on what everyone elses measurements are, I am just wondering if maybe I am a bit too low in the front.
(measured from center of wheel, straight up to fender, on "level" ground)
FL: 12.5 FR:12.5
RL: 14.0 RR: 14.0
Trust me, I spent forever trying to equalize measurements, and then had the shop put the finishing touches when he threw it on the lift lol.
Curious on what everyone elses measurements are, I am just wondering if maybe I am a bit too low in the front.
#3
Sweet thanks for that, so I am thinking it may make some sense for me to bring the front end up at least half an inch ... probably a good idea anyway since I think the camber is maxed out in the front so it might help to raise it a bit, half inch should be just enough that I wont need an alignment. Anyone else?
#6
Registered
Join Date: Sep 2009
Location: SF Bay Area
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
I had my car corner balanced locally (at Roger Kraus Racing) but I don't think my garage is all that level. So, these are rough estimates at best:
FL: 13.7 FR: 13.7
RL: 13.6 RR: 13.6
FL: 13.7 FR: 13.7
RL: 13.6 RR: 13.6
#7
2009 RX-8 R3 with Progress Sport Springs and stock Bilstein dampers:
I was measuring just about 14.5" for all of my wheels right after the installation.
I didn't take measurements before, does anyone have stock R3 measurements?
edit: here's a cellphone pic
http://www.flickr.com/photos/24069356@N05/6071374667/
I was measuring just about 14.5" for all of my wheels right after the installation.
I didn't take measurements before, does anyone have stock R3 measurements?
edit: here's a cellphone pic
http://www.flickr.com/photos/24069356@N05/6071374667/
Last edited by Suspension; 08-22-2011 at 09:24 PM.
#8
http://www.flickr.com/photos/77117762@N08/7135046791/http://www.flickr.com/photos/77117762@N08/7135046791/ by http://www.flickr.com/people/77117762@N08/, on Flickr
4-got measurements lol
4-got measurements lol
#10
Just installed powertrix coilovers. Settled on 13.5" on all corners. Did some research and the people that track/autox their cars recommend no lower than 13.5 inches.
Stock ride height was 14 3/4 front, 14 1/4 rear.
Stock ride height was 14 3/4 front, 14 1/4 rear.
Thread
Thread Starter
Forum
Replies
Last Post
Jst4fun
RX-8 Parts For Sale/Wanted
18
04-17-2021 07:43 AM
duworm
Series I Wheels, Tires, Brakes & Suspension
1
10-01-2015 04:57 PM