alexanderr101

iTrader: (2)

Hey guys so long story short the previous owner of my car put sparco seats and sold off the recaro seats which lead to the airbag light constantly being on. A few months ago, I replaced the sparco seats with the original Recaro seats that came with the car. However after close observation of the seats I could not any connectors on the seats for the airbags. Due to this I used a resistor to trick the car as suggested by other threads on this forum however, it did not work.

Just the other day however I was cleaning the car and noticed that when I unzipped the back of the seats that there is a two piece wire that has been snipped. Would this wire be the missing airbag connector? Would lengthening the wires and re-attaching the wires to the connector in the car shut the light off? Can I use any type of wire to lengthen the wire? Is there any risk of the air bags going off if I do this wrong? Any help is appreciated

Thanks
Alex

9krpmrx8

iTrader: (46)

Search.

CRO8TIA

I would be inclined to study the wiring diagram before you go connecting anything without a plug. Follow the link below, it may help you.
. https://www.rx8club.com/series-i-tro...adable-240132/