jerry43351

I have a 40th aniv. edition and i wanted it lowered so i did some research and the s techs would be great with my car 1.4 in the front and .7 in the rear one reason being i have larger tires in the back. put them on and I cant see any difference of feel any difference while driving what gives?????????

9krpmrx8

iTrader: (46)

Rookie install. Try again, and search this time before you reinstall them. Hint: Preload.

jerry43351

ok that seems to be what i did but i have installed many lowering springs on vehicles and never had to preload. So it seems i will be doing this tomorrow and i will let yall know how it all turns out.

9krpmrx8

iTrader: (46)

The RX-8 is not any vehicle Teamrx8 has a good post on proper preloading here somewhere, search for posts by him.

monchie

Keep driving it, it will go down little by little...

Wingznut

iTrader: (1)

Both. After you preload, you will notice a definite drop. And then it will settle in even more while driving it for several days/weeks.

jerry43351

oh yes saw a drop after preloading the front and aligned it and only had to set toe ty mazda for building an easily modified car.

jerry43351

this is my car now

monchie

^ Would be nicer if you have the appearance package...