Eibach Pro Kit Problem
#1
TwIsTeD KrE8iOnS
Thread Starter
Join Date: Jan 2006
Location: Pottstown, PA
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Eibach Pro Kit Problem
I installed lowering springs about 6 months ago with no problem. Just recently theres been a knocking noise from the front Left Wheel. Whenever Im going really slow or step on the brake. Anyone out there have the same problem. I did do a search on this problem but only found results on the rear doing a noise. Any suggestions. I brought the car to mazda and they told me its not the strut.
#2
Registered
iTrader: (3)
Join Date: May 2005
Location: Seattle, WA
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Check your sway bar link nuts. I had one coming loose and it sounded almost exactly like what you describe. It would pop whenever the sway bar got loaded up. You have to take these bolts out to put in springs or struts, so maybe it didn't get tight enough.
#3
TwIsTeD KrE8iOnS
Thread Starter
Join Date: Jan 2006
Location: Pottstown, PA
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dsmdriver
Check your sway bar link nuts. I had one coming loose and it sounded almost exactly like what you describe. It would pop whenever the sway bar got loaded up. You have to take these bolts out to put in springs or struts, so maybe it didn't get tight enough.
#6
TwIsTeD KrE8iOnS
Thread Starter
Join Date: Jan 2006
Location: Pottstown, PA
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Silver_Surfer
I had this same problem with my 04 Maxima. This time I purchased Tein springs and am glade I did!
#8
TwIsTeD KrE8iOnS
Thread Starter
Join Date: Jan 2006
Location: Pottstown, PA
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RX8Maine
Hasn't there been an issue with lower control arm bushings on our front suspension? Might be another thing to check.
#10
TwIsTeD KrE8iOnS
Thread Starter
Join Date: Jan 2006
Location: Pottstown, PA
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kw1k
i've been havin the same problem..
#11
Registered
Join Date: May 2006
Location: Charlotte, NC
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Evil 8
i pretty much took it to mazda just to look at it and i really dont think they even put it on the lift. Cause when they got the car the front tires had brake dust all over it and it didn't even look like they took the wheels off. and plus they didn't even have the key but there could be a master one.
#12
well i don't think is a problem with the spring itself, i have had mine for 2 years and no problems here (i have eibach also) so like the other guys have told you check and re-tight everything again something has to be loss
#13
93.5 octane
Join Date: Jun 2005
Location: Montgomery, AL
Posts: 664
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by h-khunterkiller
well i don't think is a problem with the spring itself, i have had mine for 2 years and no problems here (i have eibach also) so like the other guys have told you check and re-tight everything again something has to be loss
http://www.finishlineperformance.com...ins_index.html
Thread
Thread Starter
Forum
Replies
Last Post
xAgyex
Series I Trouble Shooting
19
11-13-2023 07:51 AM
{FS/WTT} 04 Black Rx-8 TRACK AUTOX TIMEATTACK
Billy Marcial
RX-8's For Sale/Wanted
5
03-01-2018 06:50 AM
RicerX1
West For Sale/Wanted
5
01-11-2016 05:59 PM