Bent Axles or Hub?
#6
No respecter of malarkey
iTrader: (25)
Even if it was the diff (which it isn't) with a pair of joints in the axle the axle itself would just orbit and not affect the hub end
It has to be on the wheel/hub end. Usually it is the wheel. Even if you changed wheels did you verify they are straight on a balancer machine and that they are mounting flat on the hub face (use plastigage like with checking engine bearing clearance)
If you changed the hub, hub axle stub, & bearing then it has to be the wheel
It has to be on the wheel/hub end. Usually it is the wheel. Even if you changed wheels did you verify they are straight on a balancer machine and that they are mounting flat on the hub face (use plastigage like with checking engine bearing clearance)
If you changed the hub, hub axle stub, & bearing then it has to be the wheel
Last edited by TeamRX8; 04-06-2014 at 03:45 AM.
Thread
Thread Starter
Forum
Replies
Last Post
hufflepuff
Series I Wheels, Tires, Brakes & Suspension
6
05-30-2016 10:45 AM
yankeepicker
Series I Trouble Shooting
3
09-11-2015 05:42 PM
projectr13b
Series I Do It Yourself Forum
1
09-06-2015 01:04 PM