Unicorn waste gate replacment
#1
landspeed
Thread Starter
Join Date: Sep 2012
Location: never ending
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Unicorn waste gate replacment
Hello this is the first time creating a thread. A little background on the topic. I purchased an esmeril turbo kit online (used) and was missing a few things. One being the valve for a wastegate. Now I've searched for over 4 months for the kind of wastegate or size and can't find anything. The ID of the intake side is 68mm. The ID for the exit side is 47mm. Now for a reference the outer diameter is almost 3.5" on the intake side. Upon viewing tial's spec sheet, nothing comes close to that size. Any help will be so appreciated. Oh, also, I've been unsuccessful in getting any help/ response whatsoever from the people at Esmeril. I'm stuck.
#3
landspeed
Thread Starter
Join Date: Sep 2012
Location: never ending
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I guess the issue I'm having is that nothing seems to exist. The diameter is 3.5 inches which is over an inch bigger than what anyone makes (seemingly). I contacted tial via email to see if they have any clue how to help me. They're also only about an hour drive away too so I can bring it to them so get something the same size.
#6
landspeed
Thread Starter
Join Date: Sep 2012
Location: never ending
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
This is the ID at 2.6" the outer was 3.4x with the micro. I just didn't take a picture.
[edit] I don't think the link takes you to the picture but if you click to see the previous one it *should* show the wastegate.
Last edited by landsfeldrx8; 04-20-2014 at 11:15 PM.
#10
landspeed
Thread Starter
Join Date: Sep 2012
Location: never ending
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Hey there it is! I still wonder, though, where the heck they get a 60mm measurment!
Posted From RX8Club.com Android App
Posted From RX8Club.com Android App
Last edited by landsfeldrx8; 04-21-2014 at 05:50 AM.
#11
landspeed
Thread Starter
Join Date: Sep 2012
Location: never ending
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
When I get back home I'm gonna measure the flange on the manifold. I hope I don't have to have it cut off and have it re welded.
Posted From RX8Club.com Android App
Posted From RX8Club.com Android App
Last edited by landsfeldrx8; 04-21-2014 at 06:30 AM.
#14
landspeed
Thread Starter
Join Date: Sep 2012
Location: never ending
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Well I was able to get a hold of Chris from esmeril and he told me the waste gate was a generic for HKS. Of the 60mm variety. So I will have to go with that or have a new wg flange welded for a different wg. Thank you for your help!
Last edited by landsfeldrx8; 04-21-2014 at 04:03 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Touge
Canada Forum
0
08-11-2015 10:19 PM
Touge
Canada Forum
0
07-18-2015 05:41 PM