Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

Stalling at idle

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 09-20-2014, 06:43 PM
  #1  
Registered
Thread Starter
 
Enaris's Avatar
 
Join Date: May 2014
Location: East Coast, USA
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
Stalling at idle

Hey guys.
Few cascading problems on my 2004:
1) Dash went haywire. The throttle at this time was working fine.
2) I reset the ECU when I got home, and when I started it in the morning it stalled a few seconds after starting.
3) The dash gauges continue to function now, but the throttle is acting very strange. If I manually keep the car (with foot on accelerator) around 800 RPM it "idles" just fine, but releasing the pedal (which is unresponsive from light touch to around 25-35%) causes immediate stalling.

Here is my theory: I had an electrical short somewhere. This electrical problem shot the motor for the throttle valve in the head, and now it doesn't respond properly to voltages.

Here's my question: What is the best way to confirm this diagnosis; where can I get the wiring done at a mechanic (dealers are apparently worthless) in the south jersey/ philly/ Delaware area; and does anyone have another idea of what could have caused this?

I got P-codes pending one day that I drove it for TP sensors A and B voltage too high, but they're gone now. Mysterious.
I still have U-codes for an open or short in the CAN system.
The throttle valve is clean and operates spick and spam under manual pressure.
Old 10-06-2014, 07:44 PM
  #2  
Registered
Thread Starter
 
Enaris's Avatar
 
Join Date: May 2014
Location: East Coast, USA
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
Could someone do me a solid and let me know if this is normal, or even better, upload a similar graph?

This graph compares accelarator pedal position on the x axis to relative throttle position on the y axis while the car is not running, but in the "on" position. Somewhere around 75% pedal position, the throttle starts to open very quickly; to 100% open somewhere around 80-85% pedal position.
My understanding is that at 0% accelerator pedal position the relative throttle should be around 5%; rising to 100% slowly and gradually around 85% accelerator pedal position. Could someone confirm or deny this, or upload your own graph?
I made this simply by charting in excel the output from my torque app watching REL_TP and APP E and APP D. Even just sending me the data from these PIDS on a normal RX8 would be awesome.
Thanks guys
Old 10-06-2014, 07:45 PM
  #3  
Registered
Thread Starter
 
Enaris's Avatar
 
Join Date: May 2014
Location: East Coast, USA
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
Link to picture of graph: http://imgur.com/XqGG4vf
Old 10-13-2014, 09:03 AM
  #4  
Registered
 
xdrift0rx's Avatar
 
Join Date: May 2008
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Check your ground (wherever they may be)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
theblinkof
Series I Trouble Shooting
33
10-04-2023 05:24 PM
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM
Danield97
Series I Trouble Shooting
1
09-30-2015 05:59 PM
Quiggs321
New Member Forum
19
09-30-2015 05:34 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Stalling at idle



All times are GMT -5. The time now is 12:30 PM.