boizart1

just got my car scanned on a friends scanner and I got back this one code only. What does it mean? He had a generic list and it said something about manifold something something pressure I didn't really understand it. Any idea what the code means???? I also have the light that looks like a car with squiggly lines underneath, I think it has something to do with traction control. It's always on and I can't turn it off. Any ideas on how to fix these 2 issues? Please help!!

invasion08

iTrader: (7)

Diagnostic Trouble Code (DTC) P0107
DTC Definition: MAP/BARO Circuit Low Input

boizart1

what does that mean???

Jon316G

iTrader: (1)

This code is generated when the voltage drops below 0.2V.
Check the wiring and the harness to the sensor.

boizart1

where exactly is this sensor located?

Jon316G

iTrader: (1)

Do you see the battery cover at the bottom of my attached pic?

Jon316G

iTrader: (1)

this should help too

carbonRX8

iTrader: (1)

VERY INTERESTING. I removed my secondary air pump. I figured out that the big resistor on the pump mount was needed (fuel pump) but I didnt realize that there was a sensor on there. I have the same two issues. Solid DSC light and p0107 code. DSC must need this sensor. Will go hook it up.

I also have an RKE error. I have no idea what that is.

carbonRX8

iTrader: (1)

Just as I thought. When I reinstalled the sensor both lights went away. The DSC error and the p0107 cel are tied together some how.

Razz1

REK 000039 has been reported as an unkown issue.
As far as we know... it doesn't effect performance.

Santiago Crespo

So changin the baro sensor worked?

Fijibluefg2

Thanks to this thread, I was able to easily locate the sensor and find a cut wire. Fixed it and eliminated the CEL.

I included a pic. hopefully it goes thru.