Need I worry about intake grommet issue?
#1
Registered
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: Plano, TX
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Need I worry about intake grommet issue?
I have heard stories of a certain grommet from the intake box falling into the fans.
I put on my MS intake and noticed that on the bottom tray where the stock intake box used to sit there may be a missing grommet? Should I worry about this at all?
I put on my MS intake and noticed that on the bottom tray where the stock intake box used to sit there may be a missing grommet? Should I worry about this at all?
#2
Registered
Well, take a flashlight and look around in the fan area. If you don't see the grommet, then don't fret. Both of my bottom grommets are gone to who knows where, but there is no evidence of them in the fan area. And I don't intend to replace them.
#4
My 8 looks like a Smurf
iTrader: (4)
Join Date: Sep 2007
Location: Ottawa, ON, Canada
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
^ Yep, a good flashlight will help. I have heard of people saying it gets stuck inside the fan and creates a big cooling problem, so try to make sure you find it!
Then again it may have been missing for a while or fallen to a safe place. Either way, give it a serious try before shrugging it off.
Then again it may have been missing for a while or fallen to a safe place. Either way, give it a serious try before shrugging it off.
Thread
Thread Starter
Forum
Replies
Last Post
xAgyex
Series I Trouble Shooting
19
11-13-2023 07:51 AM
Aston177
Series I Trouble Shooting
7
09-03-2015 11:07 PM