House Routing Help
#1
Registered
Thread Starter
Join Date: Jan 2011
Location: B Spa, NY
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
House Routing Help
My phone is retarded and screwed up the title.
But can anyone tell me if this splitter is suppose to be connect to this hose as pictures on the lower intake manifold as pictured.
If not, does the lower black hose connect to this piece
If so, what three bolts does this mount to? I know it connects to the intake near the throttle body.
And where does the splitter connect to then?
If I'm wrong on both counts, can anyone help me out. I've for the entire engine back in the car but can seem to find where I forgot to put this hose.
But can anyone tell me if this splitter is suppose to be connect to this hose as pictures on the lower intake manifold as pictured.
If not, does the lower black hose connect to this piece
If so, what three bolts does this mount to? I know it connects to the intake near the throttle body.
And where does the splitter connect to then?
If I'm wrong on both counts, can anyone help me out. I've for the entire engine back in the car but can seem to find where I forgot to put this hose.
Last edited by t.swain; 09-03-2014 at 08:00 PM.
#2
Modulated Moderator
iTrader: (3)
The small hose with the Y goes to the breather vent line on the intake manifold
The other line goes to the hardline...and that goes to the throttle body rubber hose..it is for the "jet air" that helps atomize fuel at low RPM's
The way you have it hooked up will do the opposite of what you want ;-)
The other line goes to the hardline...and that goes to the throttle body rubber hose..it is for the "jet air" that helps atomize fuel at low RPM's
The way you have it hooked up will do the opposite of what you want ;-)
Thread
Thread Starter
Forum
Replies
Last Post
jamespond24
RX-8 Parts For Sale/Wanted
11
12-01-2015 11:11 PM
nferguson88
RX-8 Parts For Sale/Wanted
1
10-06-2015 12:45 PM
ShellDude
RX-8 Parts For Sale/Wanted
5
10-01-2015 09:55 PM