Notices
Series I Trouble Shooting This is the place to learn more about or discuss any issues you're having with your RX-8

Eratic RPM's When Engaging Clutch

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 11-14-2008, 10:31 PM
  #1  
of the south
Thread Starter
 
WickedWitch's Avatar
 
Join Date: Oct 2008
Location: Virginia
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Eratic RPM's When Engaging Clutch

For about a week now when I push in my clutch at slow speeds the rpm's drop below 1k almost to 0 then bounces back and forth then stabalizes back at 1k after, and has stalled twice but started right back up with no problems. Other than that the car drives fine with no CEL'S. Any Ideas as to what is causing this?
Old 11-14-2008, 10:36 PM
  #2  
Administrator
iTrader: (7)
 
Jedi54's Avatar
 
Join Date: Mar 2004
Location: The Dark Side
Posts: 22,394
Received 2,630 Likes on 1,880 Posts
does it act like this? If so, most likely a bad neutral switch.

Note: This was taken with the car sitting in my driveway in neutral.



Old 11-14-2008, 10:36 PM
  #3  
Modulated Moderator
iTrader: (3)
 
dannobre's Avatar
 
Join Date: Feb 2004
Location: Smallville
Posts: 13,718
Received 334 Likes on 289 Posts
might be a clutch switch...but it usually throws a CEL.....
Old 11-14-2008, 11:57 PM
  #4  
Out of NYC
iTrader: (1)
 
nycgps's Avatar
 
Join Date: Jun 2005
Location: Planet Earth
Posts: 19,881
Received 32 Likes on 30 Posts
Originally Posted by dannobre
might be a clutch switch...but it usually throws a CEL.....
trust me ... it wont throw any CEL ...
Old 11-15-2008, 12:34 AM
  #5  
Rotary wanabee
iTrader: (1)
 
heyarnold69's Avatar
 
Join Date: Jul 2007
Location: Long Island, NY
Posts: 1,978
Likes: 0
Received 0 Likes on 0 Posts
i have the same problem
Old 11-15-2008, 01:14 AM
  #6  
Modulated Moderator
iTrader: (3)
 
dannobre's Avatar
 
Join Date: Feb 2004
Location: Smallville
Posts: 13,718
Received 334 Likes on 289 Posts
You can replace both switches for about $35. One is about $8 and the other about $27

One throws a CEL for sure...the other one I don't know
Old 11-15-2008, 09:00 AM
  #7  
of the south
Thread Starter
 
WickedWitch's Avatar
 
Join Date: Oct 2008
Location: Virginia
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
so a clutch switch or a nuetral switch would cause the rpms to dance between o and 1k? When idling the car doesn't do it, it only happens when down shifting while driving. Also where are the switches located and can I pick them up at a pep boys or advance auto?
Old 11-15-2008, 09:37 AM
  #8  
sofa king
 
restiller's Avatar
 
Join Date: Apr 2007
Location: Great America, IL
Posts: 292
Likes: 0
Received 0 Likes on 0 Posts
subscribing.

I've had an occurrence similar to Jedi's video when the outside temp would dip below 20F, but the idle would stabilize once the car itself came to operating temps.

never knew about a clutch switch...
Old 11-15-2008, 10:49 AM
  #9  
Modulated Moderator
iTrader: (3)
 
dannobre's Avatar
 
Join Date: Feb 2004
Location: Smallville
Posts: 13,718
Received 334 Likes on 289 Posts
You would have to buy them at a dealer.... Hell for $35 it's not a big deal

If the car is still under warranty they will be covered
Old 11-15-2008, 10:50 AM
  #10  
Administrator
iTrader: (7)
 
Jedi54's Avatar
 
Join Date: Mar 2004
Location: The Dark Side
Posts: 22,394
Received 2,630 Likes on 1,880 Posts
no CEL ever came on with my neutral switch problem. Issue was fixed when Mazda gave me a new transmission. (2nd and 5th gear synchros were going...fast)
Old 11-15-2008, 11:27 AM
  #11  
of the south
Thread Starter
 
WickedWitch's Avatar
 
Join Date: Oct 2008
Location: Virginia
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Actually now it doesn't happen at low speed now if I come up to a red light and have to shift down to a stop or round a corner it bounces between 0 and 1k rpm then stabalizes. I don't think it is a nuetral switch because it is a below 1k thing and it only happens when driving. Also if I push the clutch in and out while stopping it won't do the bounce it idles down normal, it only happens when I push the clutch all the way in coming to a stop.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WranglerFan
New Member Forum
4
05-31-2022 07:51 AM
Mane
New Member Forum
2
11-20-2015 12:16 PM
GARCIAC951
Series I Tech Garage
8
09-10-2015 07:17 PM
Anthony Kevin
New Member Forum
1
09-07-2015 07:36 PM
Kim Jong Illest
Series I Trouble Shooting
3
09-04-2015 04:27 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Eratic RPM's When Engaging Clutch



All times are GMT -5. The time now is 05:56 AM.