Clutch Problems... Push rod with leaking Master Cylinder
#1
Registered
Thread Starter
Clutch Problems... Push rod with leaking Master Cylinder
So... I have been having the same problems as everyone else so I decided to see if I can adjust the clutch pedal. I took it all apart and I come to find that the push rod that connects the clutch pedal to the master cylinder is bent and now my master cylinder is leaking... Now im thinking of buying the Clutch Pedal w/ Aluminum Pad from Mazdatrix and a Master Cylinder rebuild kit from Rock Auto... Does anyone know if the pedal from Mazdatrix come with the Pushrod?
#3
Registered
Thread Starter
Yeah I already took down their number to call tomorrow. What do u think of rebuilding the master cylinder? And what's ur take on the HD release bearing?
#4
Grasshopper
iTrader: (1)
If you were able to find a rebuilt kit for this master cylinder... sure.
If not and you wanted to play this on the "cheap side", go to the local salvage yard and get a MC there.
I like it... piece of mind knowing I have a "heavy duty" bearing.
I replaced my flywheel and clutch, so it only made sense to upgrade that while the transmission was dropped.
I got mine from BHR who is a great forum vendor here.
If not and you wanted to play this on the "cheap side", go to the local salvage yard and get a MC there.
I like it... piece of mind knowing I have a "heavy duty" bearing.
I replaced my flywheel and clutch, so it only made sense to upgrade that while the transmission was dropped.
I got mine from BHR who is a great forum vendor here.
#5
Registered
Thread Starter
Yeah rock auto has them. Im gonna call the stealership tomorrow see if what parts they have on hand, if not them im gonna have to over night these things.... I'm gonna look into the release bearing also
Thread
Thread Starter
Forum
Replies
Last Post