Agency Power Exhaust Issue
#1
I don't buy Kool-Aid
Thread Starter
Agency Power Exhaust Issue
My friend installed his AP Exhaust and the bottom of the tips are touching the exhaust shroud.
How can we fix this before it melts his shroud?
Thanks!
How can we fix this before it melts his shroud?
Thanks!
#4
Administrator
iTrader: (7)
improperly installed or bent hanger.
#5
1 inch is the best clearance. Need min. 1/2"
As soon as you track it or drive hard you will touch the shroud either way and melt it.
I've melted the shroud using the Racing Beat.
Push it hard and do a spin on the track or jerk it to the right or left in Autocross
it will melt.
Best thing to do is to buy those aluminum inserts or go to the hardware store and buy some black neoprene/rubber and glue it on the inside
As soon as you track it or drive hard you will touch the shroud either way and melt it.
I've melted the shroud using the Racing Beat.
Push it hard and do a spin on the track or jerk it to the right or left in Autocross
it will melt.
Best thing to do is to buy those aluminum inserts or go to the hardware store and buy some black neoprene/rubber and glue it on the inside
#6
Man I told you about this fitment on the AP exhaust. Give Brice from FluidMotorsports a call, he claims he has it on his car without any fitment issues.
Last edited by AJ's Shinka; 01-31-2009 at 06:53 PM.
#7
I don't buy Kool-Aid
Thread Starter
Its not a bid deal really I mean even mike melted his and mine are going too. Hell I parts of my back bumper are black not blue but I really think its the exhaust hanger. Let me see what happens and get back to you.
Thread
Thread Starter
Forum
Replies
Last Post
{FS/WTT} 04 Black Rx-8 TRACK AUTOX TIMEATTACK
Billy Marcial
RX-8's For Sale/Wanted
5
03-01-2018 06:50 AM
N0P1st0ns
Series I Aftermarket Performance Modifications
4
07-30-2015 09:45 AM
dbarber
Series I Trouble Shooting
14
07-25-2015 01:34 PM