Abs/Dsc Problem
#1
Registered
Thread Starter
Join Date: Jul 2013
Location: Montreal
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Abs/Dsc Problem
I have a problem for a long, it start with my light Emergency stop it no longer works the fuse still blows and as soon as I hit the brakes too hard I lose my abs and my Dsc, anybody has already had the same type of problem ????
My car still brake very good
C1290
U1900
My car still brake very good
C1290
U1900
#3
Yank My Wankel
iTrader: (4)
From what I can interpret his E-brake light does not work, and his ABS system is drawing more current than it should blowing the ABS fuse, but he is not seeing any brake problems when the ABS is not activated.
But we will leave the final interpretation up to him, I think the ABS is on a 60 or 80 amp fuse either way that's a lot of current in order to pop that thing.
But we will leave the final interpretation up to him, I think the ABS is on a 60 or 80 amp fuse either way that's a lot of current in order to pop that thing.
#4
Registered
Thread Starter
Join Date: Jul 2013
Location: Montreal
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for this difficult sentence to understand , I have a problem with my brake light when I press my brake the light does not light up. The fuse for the taillights, spends his time to burn.
And my abs and dsc disables itself when I press too hard on the brake.But I never had a problem with my brakes, it works very well even with the abs in error
c1290
u1900
And my abs and dsc disables itself when I press too hard on the brake.But I never had a problem with my brakes, it works very well even with the abs in error
c1290
u1900
Thread
Thread Starter
Forum
Replies
Last Post
Shankapotamus3
Series I Trouble Shooting
28
03-14-2021 03:53 PM
tommy26Germany
Series I Trouble Shooting
11
09-29-2015 10:33 AM