tonyjms2005

Hi
I have a 2008 231, when below 3k rpm and quite often when cold I get a rattling sound from the engine when underload, ie pulling off and gentle accelerating. Sounds like the old MIAC sound?

Has anyone fitted the revised ssv? Has it cured the rattling noises? I am pretty sure it is the ssv?

Thanks

Antony

9krpmrx8

iTrader: (46)

Well if the noise is the actuator arm on the SSV then installing a new one will surely eliminate the noise. I replaced mine with a used pre upgrade one and after a year it started the rattle again as well.

Brettus

iTrader: (2)

The revised one should be a winner . Any one priced one ?

9krpmrx8

iTrader: (46)

It was a couple hundred U.S. last I checked.

9krpmrx8

iTrader: (46)

www.onlinemazdaparts.com

Part Number N3H520160F
Part Name VALVE,SHUTTER-MANIFO
MSRP $320.30
Online Price $249.83

9krpmrx8

iTrader: (46)

I have the TSB about it as well that nycgps gave me if anyone needs it.

https://drive.google.com/file/d/0B2B...ew?usp=sharing

tonyjms2005

Hi
Thanks for the replies, my ssv doesn't have the rattle at idle just under load and when accelerating, is this consistent with others are getting? I have often wondered if it is doing anything negative for performance? For example the knock sensor may pick up the vibration and retard the ignition?

Thanks

Antony