You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join RX8Club.com today!
Which wire supplies 12v / IGN /GND & power stock RX8 EMS/ECU?
hey guys, I installed rx8 reluctor ring & sensor to my 20b project to use my stock tachometer. I can't get the tach and power steering to work correctly. After looking at my harnesses, I'm certain that my stock ECU is not getting power from the battery. But even with the wire diagram, I can't figure out which wire to splice power, ign, GND, and the any necessary wires to get power to the stock ECU. could someone let me know? My engine harness is completely cut and hacked, so I need to know which wire(s) from the 5 white plastic connectors from behind the stock ECU to connect to supply power.
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on RX8Club.com!
Linear Mode
