victor13b

hello
i need to know
i have a fd engine with oem flywheel ,i planning to use with rx8 5 speed transmission but today i see the rx8 clutch and pressure plate no fit to fd flywheel so is that true? i need to change the flywheel or buy a pressure plate ands cluch of fd!th problem is the fd clutch sistem is no pull function

victor13b

??????????

Brettus

iTrader: (2)

You need to get the flywheel housing off a 5 speed FD gearbox if you want to do that ....

What car is it going into ? An RX7 or 8 ?

oops - just realised it's going into an 8. That should work fine - it should bolt straight up and clutch will work .

victor13b

rx8

TeamRX8

iTrader: (25)

use an RX8 6spd flywheel with an RX8 clutch, the RX8 flywheel is a direct bolt-on

Brettus

iTrader: (2)

/\yeah - got a bit mixed up with what was going on there . Sorry Victor

victor13b

today i buy a rx7 fc turbo 1990 clutch disc,pressure plate and fit to 1993 flywheel!!!
but i buy all fc in the kit! but i dont know the clutch realese bearing of fc fit fine in the transmission!

i cant use fc realease bearing?

nycgps

iTrader: (1)

fc is push, FD is pull. so nope it will not work.

victor13b

i have rx8 transmisión .so I have push . rx8 5speed transmission

victor13b

https://db.tt/rIEXfok2
here some pics

nycgps

iTrader: (1)

*shurgs*

you don't even know the car well enough and u are doing frankinstein swap.

*facepalm*

team already told u what you need. and yet you still tried to fit that FD Flywheel to fit ?

victor13b

the fD flywheel fit to fc turbo pressure plate .that issue is resolved.
i need to know the issue about realease bearing fitment

nycgps

iTrader: (1)

oh god ... it's so obvious that they are different ...