Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

Pull to the left or right when breaking?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 10-03-2004, 07:46 PM
  #1  
PUSHER ROBOT
Thread Starter
 
w0rm's Avatar
 
Join Date: Sep 2004
Location: Norman
Posts: 655
Likes: 0
Received 0 Likes on 0 Posts
Pull to the left or right when breaking?

I've noticed a rather strong 'pull' to the left OR right while I am breaking from a slow speed to stop.

The first time it happened i thought i snagged the steering wheel on something or there was a power steering problem of some kind. If I am going over twenty and come to a stop(this is not hard breaking in either case) then it seems to be fine.. but if I'm breaking from a slower speed the car tends to pull to one side or the other(seemingly at random).

Any thoughts? I would expect a car to pull a little, but this almost feels like only one break or the other is engaging. I had about the same feeling when one of my break pads on an old car was MIA.
Old 10-03-2004, 07:49 PM
  #2  
⎝⏠⏝⏠⎠
 
mysql101's Avatar
 
Join Date: Apr 2004
Location: USA
Posts: 8,625
Received 5 Likes on 4 Posts
it's pulling towards the slope of the road.

It's normal. You'll notice the same pull when you take your hands off the wheel on an uneven road. Braking seems to make it happen to a larger degree, maybe someone else has a technical explanation for it.
Old 10-03-2004, 08:03 PM
  #3  
www.dorkage.com
 
w2aew's Avatar
 
Join Date: Dec 2003
Location: Bridgewater Twp, NJ
Posts: 371
Likes: 0
Received 0 Likes on 0 Posts
It will happen whenever you are on well-travelled roads, where grooves or slight valleys have developed or worn into the road surface where the tires ride. The car will tend to pull when in these grooves - left or right depending upon where your tires are sitting the grooves. As previously stated, it will also occur (but to a lesser degree) when simply driving on such roads. Its a combination of the low-profile tires causing tramlining, and the suspension geometry. It is normal. However, if it happens to you EVERY time you stop, regardless of road surface and speed, then you might have a problem worth checking out.
Old 10-03-2004, 08:38 PM
  #4  
PUSHER ROBOT
Thread Starter
 
w0rm's Avatar
 
Join Date: Sep 2004
Location: Norman
Posts: 655
Likes: 0
Received 0 Likes on 0 Posts
That explains it, i didnt think of the possibility of the low profiles enhancing the 'groove following'. That and this car's powered steering is just a bit different from the previous cars i've had.

Thanks for the replies, i'll keep an eye on it.
Old 10-04-2004, 03:42 AM
  #5  
Registered User
 
RobDickinson's Avatar
 
Join Date: Mar 2003
Posts: 1,571
Likes: 0
Received 1 Like on 1 Post
Its called tramlining.

The wider and lower profile the tyre , the more the car will do it.

If in any doubt go find somewhere flat and try stopping. The car should stop (from over 100mph, tested...) in a dead straight line with max braking and no hands on the wheel.
Old 10-04-2004, 05:57 AM
  #6  
Senior Member
 
rx8cited's Avatar
 
Join Date: Jul 2003
Location: DC Metro Area, USA
Posts: 1,554
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by w0rm
I've noticed a rather strong 'pull' to the left OR right while I am breaking from a slow speed to stop. ......
How many miles do you have and does it happen every time your brake?

When I first got my car, I had some really bad pulls occasionally when I braked .......... almost like the brakes were not working evenly as you've described ........ it stopped happening after a few thousand miles.

In my case, I think it was the brakes vs tramlining.

rx8cited

Last edited by rx8cited; 10-04-2004 at 07:43 AM.
Old 10-04-2004, 06:34 AM
  #7  
Registered
 
magixpuma's Avatar
 
Join Date: Mar 2004
Posts: 808
Likes: 0
Received 1 Like on 1 Post
yeah i also just realized cars do this i never noticed this because im used to driveing "sport taurus's"
Old 10-04-2004, 07:10 AM
  #8  
'RX-EIGHT'
 
RXE16T's Avatar
 
Join Date: Feb 2004
Posts: 2,768
Likes: 0
Received 0 Likes on 0 Posts
If it continues all the time, it might mean you have to get the brakes checked out immediately.

Could just be a simple bleeding of the brakes or a disc rotor machining.
Old 10-04-2004, 11:54 PM
  #9  
Stainless
 
AQA101's Avatar
 
Join Date: May 2004
Location: Germany
Posts: 435
Likes: 0
Received 0 Likes on 0 Posts
It's a tramlining (aka railroading) effect. You'll notice that it happens at the same places every time, typically if the road is worn out. The effect is not limited to braking at slow speeds though, so keep your hands on the wheel whenever you hit the brake. The first time it happened to me was on the autobahn at 130 mph and I was quite surprised. You'll get used to it though.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WranglerFan
New Member Forum
4
11-05-2017 09:35 AM
R3Dream
Series II Technical and Trouble shooting
48
03-12-2016 01:44 PM
Tsurugi
New Member Forum
0
09-07-2015 08:27 PM
projectr13b
Series I Do It Yourself Forum
1
09-06-2015 01:04 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Pull to the left or right when breaking?



All times are GMT -5. The time now is 02:29 AM.