You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join RX8Club.com today!
I have searched to no avail so i am sorry if this has been covered somewhere already.
So my question is does any one know how to remove the rear bumper, I have only gotten as far as removing the plastic guard liner and the 2 screws on the tabs at each end of the bumper and also 3 plastic clips just behind the bumper, after this the bumper is still very secured on and i dont want to damage anything trying to pry it off, please help.
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on RX8Club.com!
You have to remove the trunk liner and the tail lights...there are screws on eack side and big clips. There are clips on the lower edge, and on the wheel arch that need to come out as well.
When you have the fasteners out..you have to pop the bumper off the clips between the fender an the top edge of the bumper cover
Go slow an be careful...and if possible get some help...the retaining clips on the top edge can be bent easily when the fender cover comes off....
Linear Mode
