MAF sensor removal
#1
Registered
Thread Starter
Join Date: Mar 2010
Location: Florida
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
MAF sensor removal
ive used the search tool i cannot find how to remove the maf sensor i know to unscrew the two screws but i dont know how to take the actual sensor off. please help?
#4
Surf Hard, Drive Hard
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes
on
9 Posts
ha ha ha.................well, there is a first time for everything I guess.
Might be worth saying at this point.....be careful and don't mess up the "o-ring" seal when doing so.
Might be worth saying at this point.....be careful and don't mess up the "o-ring" seal when doing so.
#6
Grasshopper
iTrader: (1)
^Yeah... maybe we should cover all the basics.
Sometimes we forget that many don't know even the simplest things until they do it.
Here is a pic of the MAF being removed after the two screws are removed and wiring harness disconnect:
Read this on how to clean the MAF and how to tell where its located within the housing:
https://www.rx8club.com/showpost.php...71&postcount=9
Sometimes we forget that many don't know even the simplest things until they do it.
Here is a pic of the MAF being removed after the two screws are removed and wiring harness disconnect:
Read this on how to clean the MAF and how to tell where its located within the housing:
https://www.rx8club.com/showpost.php...71&postcount=9
#11
Registered
Since nobody said it, do not screw it back in very tight. Get the screws maybe a little over hand tight but not by much, its very very easy to strip the plastic threads.
#12
Registered
Thread Starter
Join Date: Mar 2010
Location: Florida
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
im freaking asking how to remove the wire harness not the actual sensor i said i know how to take it out just need to know if i just pull the wire harness out or what?
#13
Registered
You asked about removing he maf sensor and then said you don't know how to get the actual sensor off. If you meant the wiring attached to it then you should have just said that.
Try being a little nicer to people that your asking for help from. You pinch the end the wires are coming out from in the middle and pull.
Try being a little nicer to people that your asking for help from. You pinch the end the wires are coming out from in the middle and pull.
#14
Surf Hard, Drive Hard
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes
on
9 Posts
Yeah, that looks pretty sweet Jon.
Gives me an idea!
Look what I was up to today! It kicked mt @ss though, my legs are tired!
And I suffered on pinch between the tiles as the snap together hitting with the rubber mallet!
Gives me an idea!
Look what I was up to today! It kicked mt @ss though, my legs are tired!
And I suffered on pinch between the tiles as the snap together hitting with the rubber mallet!
Last edited by Mazurfer; 02-18-2011 at 08:29 PM.
Thread
Thread Starter
Forum
Replies
Last Post
JimmyBlack
Series I Major Horsepower Upgrades
273
02-10-2020 10:23 PM