Dissasembled upper manifold, Now car runs rough, stalls out
#1
Registered
Thread Starter
Join Date: Feb 2012
Location: ontario, Canada
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Dissasembled upper manifold, Now car runs rough, stalls out
Hey hopping someone could give me a hand here, was taking appart my uim earier today, when i reassembled everything the car starts but runs extremely rough and stalls out unless I keep on the throttle.
I also unplugged the battery while i was working but this is not the car trying to relearn its fuel trims, ive experienced that before and this is different.
My guess is i forgot to connect something to do with the air pressure or put something in the wrong place.
Does anybody have any ideas as to where i should begin my search?
I also unplugged the battery while i was working but this is not the car trying to relearn its fuel trims, ive experienced that before and this is different.
My guess is i forgot to connect something to do with the air pressure or put something in the wrong place.
Does anybody have any ideas as to where i should begin my search?
#3
New Age Knight
Join Date: Jul 2012
Location: San Antonio, Texas
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
I've had similar fuel trim problems on my car, and I found that my car won't learn its idle unless you let it do so by itself (no AC or defroster). Mine will usually stall 3-7 times before learning to idle if I try to help it with the gas pedal.
#4
Registered
Thread Starter
Join Date: Feb 2012
Location: ontario, Canada
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
appreciate the response, mafs connected, theres 3 hoses connected to the intake tube, not sure about electricals, theres three plugs behind the uim that are in correctly so not those, i dont think its trying to relearn fuel trims, if had that before and the car would always idle fine until it warmed up, thats when the idle would get rough/stall. ill attempt to let it idle again, you never know
#5
Registered
Thread Starter
Join Date: Feb 2012
Location: ontario, Canada
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
just tried to let it idle by itself again, no luck, tried 4-5 times with each attempt showing no improvement. car starts up normally then dies with 2 seconds.
#6
Registered
Thread Starter
Join Date: Feb 2012
Location: ontario, Canada
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
are there any specific connections/ plug-ins that I should be looking for, otherwise im just gunna have to take the mani apart again and reassemble.
#9
no agenda
iTrader: (2)
The re-learn of fuel trims is BS IMO
If your computer is struggling that much to learn trims something else is wrong.
Glad you got it figured out.
Don't know where you're located in O'ville but we had a mini meet yesterday and did a cruise on River Road ... it was a good day.
Sorry you missed it.
PM me
If your computer is struggling that much to learn trims something else is wrong.
Glad you got it figured out.
Don't know where you're located in O'ville but we had a mini meet yesterday and did a cruise on River Road ... it was a good day.
Sorry you missed it.
PM me
#10
Registered
Thread Starter
Join Date: Feb 2012
Location: ontario, Canada
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
The re-learn of fuel trims is BS IMO
If your computer is struggling that much to learn trims something else is wrong.
Glad you got it figured out.
Don't know where you're located in O'ville but we had a mini meet yesterday and did a cruise on River Road ... it was a good day.
Sorry you missed it.
PM me
If your computer is struggling that much to learn trims something else is wrong.
Glad you got it figured out.
Don't know where you're located in O'ville but we had a mini meet yesterday and did a cruise on River Road ... it was a good day.
Sorry you missed it.
PM me
#11
no agenda
iTrader: (2)
Cool.
There's a great pub in Tera Nova we like to hit.
Yesterday we just did some trans and diff fluid changes.
I think Darkbrew will be coming back up from Burl's in a couple weeks.
Probably doing a oil change and maybe a his brothers BHR kit if it has arrived.
I'll PM you.
Oh I've got a WWP RX8. I live over on the west side.
There's a great pub in Tera Nova we like to hit.
Yesterday we just did some trans and diff fluid changes.
I think Darkbrew will be coming back up from Burl's in a couple weeks.
Probably doing a oil change and maybe a his brothers BHR kit if it has arrived.
I'll PM you.
Oh I've got a WWP RX8. I live over on the west side.
Thread
Thread Starter
Forum
Replies
Last Post