Notices
Series I Tech Garage The place to discuss anything technical about the RX-8 that doesn't fit into any of the categories below.

can you turn off check engine light by unplugging the battery for an hour?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 04-09-2008, 02:38 PM
  #1  
Registered
Thread Starter
 
rx8m04's Avatar
 
Join Date: Apr 2008
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
can you turn off check engine light by unplugging the battery for an hour?

does anyone know if you can turn off the check engine light by unplugging the battery for an hour? i had a spark plug issue ......so i changed those but now i just want to get that enginge light off.
Old 04-09-2008, 02:39 PM
  #2  
Power!!
 
shaunv74's Avatar
 
Join Date: Feb 2004
Location: Sunny See attle
Posts: 4,412
Received 3 Likes on 3 Posts
Are you sure that solved the problem? I would go to an autozone and pull the code to find out what the problem is. When you fix a problem the CEL should go away.
Old 04-09-2008, 03:07 PM
  #3  
Registered
Thread Starter
 
rx8m04's Avatar
 
Join Date: Apr 2008
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
actuall i had it at a dealer and they said i needed new plugs but then they wanted to charge me 300$ to do it so i just got out of there and ordered them myself and put them in. everything is good to go now just that light is on. i went to advanceauto today and they didnt have a CAN scanner only OBDII. so no help there but one of my freinds said to just unplug it for an hour and then it should go away.
Old 04-09-2008, 03:10 PM
  #4  
The Professor
 
staticlag's Avatar
 
Join Date: Aug 2004
Location: Omaha, NE
Posts: 3,479
Likes: 0
Received 6 Likes on 5 Posts
unplugging it does make it go away.
Old 04-09-2008, 03:12 PM
  #5  
Registered User
 
Butch Brown's Avatar
 
Join Date: Jun 2004
Location: Pillow, PA
Posts: 159
Likes: 0
Received 0 Likes on 0 Posts
disconnect both + _ cables from battery then touch them to each other then reconnect to battery. After you start your car you will need to turn steering fully left then fully right, turn off ignition and restart, that will clear the TCS light.
Old 04-09-2008, 03:29 PM
  #6  
Registered
Thread Starter
 
rx8m04's Avatar
 
Join Date: Apr 2008
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Butch Brown
disconnect both + _ cables from battery then touch them to each other then reconnect to battery. After you start your car you will need to turn steering fully left then fully right, turn off ignition and restart, that will clear the TCS light.
i will try just unpluggin it and then if that doesnt work i will try what you said.....what does turning left and right do and why would i have to touch the +- together. im not doubting im just interseted. im sure there are different ways to do this.
Old 04-13-2008, 05:18 AM
  #7  
Registered
iTrader: (2)
 
BoosTED's Avatar
 
Join Date: Dec 2004
Location: Minneapolis, MN
Posts: 2,896
Likes: 0
Received 2 Likes on 2 Posts
Turning the wheel full lock left and then right recalibrates the dynamic stability control.
Old 04-13-2008, 08:29 AM
  #8  
Surf Hard, Drive Hard
 
Mazurfer's Avatar
 
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 11 Likes on 9 Posts
ANYTIME you unplug the battery you will have to do this reset or you will get the DCS/TCS lights. Turn car to on(not start), turn wheel all the way to right, then all the way to left, then key off, then you can start as normal.

Last edited by Mazurfer; 04-13-2008 at 02:13 PM.
Old 04-13-2008, 09:33 AM
  #9  
Out of NYC
iTrader: (1)
 
nycgps's Avatar
 
Join Date: Jun 2005
Location: Planet Earth
Posts: 19,881
Received 32 Likes on 30 Posts
this op failed.
Old 04-13-2008, 12:02 PM
  #10  
Registered
 
Go48's Avatar
 
Join Date: Jul 2004
Location: Fayetteville, PA
Posts: 2,598
Likes: 0
Received 2 Likes on 2 Posts
Rx-8 Owners Manual:
"NOTE:
If the battery is disconnected, the DSC
will be inoperable. In this case, the DSC
OFF indicator light flashes and the
TCS/DSC indicator light illuminates.
To make the DSC operable, do the
following procedure.

1. Turn the ignition switch to the ON
position.
2. Turn the steering clockwise fully,
then turn it counterclockwise fully.
3. Make sure the DSC OFF indicator
goes off.
4. Turn the ignition switch to the OFF
position, then turn it to the ON
position again.
5. Make sure the TCS/DSC indicator
light goes off.

If the TCS/DSC indicator light and the
DSC OFF indicator light remain
illuminated even after turning the
ignition switch to the ON position,
consult an Authorized Mazda Dealer."
Old 04-13-2008, 06:51 PM
  #11  
Registered
iTrader: (2)
 
BoosTED's Avatar
 
Join Date: Dec 2004
Location: Minneapolis, MN
Posts: 2,896
Likes: 0
Received 2 Likes on 2 Posts
It works either way.

Old 04-14-2008, 07:30 AM
  #12  
Registered
Thread Starter
 
rx8m04's Avatar
 
Join Date: Apr 2008
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Thanks everyone!
Old 04-14-2008, 10:01 AM
  #13  
I <3 Sushi
iTrader: (21)
 
Spinning Sushi's Avatar
 
Join Date: Aug 2006
Location: SoCal
Posts: 3,967
Likes: 0
Received 3 Likes on 3 Posts
You made two threads with the same title and asked the exact same question...
https://www.rx8club.com/series-i-tech-garage-22/can-you-turn-off-check-engine-light-unplugging-battery-hour-142876/
Old 04-14-2008, 10:02 AM
  #14  
I <3 Sushi
iTrader: (21)
 
Spinning Sushi's Avatar
 
Join Date: Aug 2006
Location: SoCal
Posts: 3,967
Likes: 0
Received 3 Likes on 3 Posts
Oh, I forgot to mention that you also posted in the wrong section of the forum....
Old 11-21-2009, 07:36 PM
  #15  
Registered User
 
RX8 Newby's Avatar
 
Join Date: Aug 2009
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
You guys are great. I have been trying to figure out how to get those two lights off!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vapor2
West For Sale/Wanted
11
11-03-2020 03:38 PM
akagc
RX-8's For Sale/Wanted
7
08-11-2015 07:07 PM
Ajmurphy85
New Member Forum
3
07-30-2015 07:51 AM
marc2820
New Member Forum
6
07-26-2015 10:47 PM
netrovers
New Member Forum
6
07-20-2015 03:32 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: can you turn off check engine light by unplugging the battery for an hour?



All times are GMT -5. The time now is 05:28 PM.