adding oil
02-21-2006, 01:54 PM
#1
THE BITCH IS DEAD
Thread Starter
Join Date: Sep 2005
Location: Dayton, Texas
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
adding oil
i was just curious on to what is the "CORRECT" procedure to add oil when needed. (when correct, i mean like should i wait few minutes after turning it off b4 i pour the oil?)
02-21-2006, 02:10 PM
#2
Registered
I dont think it matters
02-21-2006, 04:06 PM
#3
Administrator
make sure the engine is warm then shut if off and wait a couple of minutes before checking the level.
Add some wait a moment then check the level again.
repeat until you have brought the oil to the full line
always check the oil warm and engine off
always check/fill tires "cold" i.e. not having been driven on in an hour or so. preferably overnight.
Add some wait a moment then check the level again.
repeat until you have brought the oil to the full line
always check the oil warm and engine off
always check/fill tires "cold" i.e. not having been driven on in an hour or so. preferably overnight.
02-21-2006, 05:04 PM
#5
Administrator
many people have not taken a "basic physics course" or we would not have numerous threads everyautumn (or cold snap for that matter) stating " my TPMS light was on this morning but it went off one my way to work. whats wrong with it? i checked the pressures when i got to work and they were all fine."
Thread
Thread Starter
Forum
Replies
Last Post
JimmyBlack
Series I Major Horsepower Upgrades
273
02-10-2020 10:23 PM
Tsurugi
New Member Forum
0
09-07-2015 08:27 PM
