** Factory Repair/Recall of RX-8 Airbags **
02-17-2004, 11:37 AM
#1
Registered
Thread Starter
Join Date: Oct 2001
Location: Boulder County, Colorado
Posts: 7,966
Likes: 0
Received 4 Likes
on
3 Posts
** Factory Repair/Recall of RX-8 Airbags **
Originally posted by markpmm
2004 MPV & 2004 RX-8 Front Passenger-Side Airbag Recalls 1604B-a and 1604B-b STOP DELIVERY
This is to notify you of a recall and STOP DELIVERY on the 2004 MPV and 2004 RX-8. This recall and stop delivery notification is for dealer inventory vehicles. This message provides dealers with detailed parts information, warranty claim processing information, and repair procedures.
Beginning today, February 16, 2004, all 2004 MPV and 2004 RX-8 models in dealer inventory must be inspected and repaired (if necessary) prior to customer delivery.
Selling or leasing subject vehicles without performing the necessary inspection and/or repair is prohibited by law. Failure to perform applicable recalls before delivery can result in extensive dealer fines from the Federal Government. Once 2004 MPV and 2004 RX-8 models have been inspected and repaired (if necessary), customer delivery may begin.
Mazda Motor Corporation has decided that 2004 MPV vehicles produced from August 20, 2003 through February 4, 2004 fail to conform to requirements of Federal Motor Vehicle Safety Standard No. 208, Occupant Crash Protection. Also, Mazda Motor Corporation has decided that a defect, which relates to motor vehicle safety, exists in certain 2004 RX-8 vehicles produced from April 10, 2003 through January 28, 2004.
Certain 2004 MPV and 2004 RX-8 vehicles were produced with improperly wired front passenger-side airbags. The result of this problem is that the airbag will not provide adequate protection in the event of a crash. Mazda has decided to conduct a recall campaign to correct the wiring by installing a new wiring harness in the front passenger-side airbag system on all affected vehicles.
Owners of affected vehicles will be notified by first class mail beginning February 27, 2004.
SUBJECT VEHICLES
Model
VIN Range
Build Date Range
2004 MPV
JM3LW28**40 500013 - 519303
August 20, 2003 - February 4, 2004
2004 RX-8
JM1FE17**40 100053 - 131563
April 10, 2003 - January 28, 2004
Note: The asterisk symbol "*" can be any letter or number.
OWNER NOTIFICATION
Mazda will notify U.S. owners by first class mail beginning February 27, 2004.
2004 MPV & 2004 RX-8 Front Passenger-Side Airbag Recalls 1604B-a and 1604B-b STOP DELIVERY
This is to notify you of a recall and STOP DELIVERY on the 2004 MPV and 2004 RX-8. This recall and stop delivery notification is for dealer inventory vehicles. This message provides dealers with detailed parts information, warranty claim processing information, and repair procedures.
Beginning today, February 16, 2004, all 2004 MPV and 2004 RX-8 models in dealer inventory must be inspected and repaired (if necessary) prior to customer delivery.
Selling or leasing subject vehicles without performing the necessary inspection and/or repair is prohibited by law. Failure to perform applicable recalls before delivery can result in extensive dealer fines from the Federal Government. Once 2004 MPV and 2004 RX-8 models have been inspected and repaired (if necessary), customer delivery may begin.
Mazda Motor Corporation has decided that 2004 MPV vehicles produced from August 20, 2003 through February 4, 2004 fail to conform to requirements of Federal Motor Vehicle Safety Standard No. 208, Occupant Crash Protection. Also, Mazda Motor Corporation has decided that a defect, which relates to motor vehicle safety, exists in certain 2004 RX-8 vehicles produced from April 10, 2003 through January 28, 2004.
Certain 2004 MPV and 2004 RX-8 vehicles were produced with improperly wired front passenger-side airbags. The result of this problem is that the airbag will not provide adequate protection in the event of a crash. Mazda has decided to conduct a recall campaign to correct the wiring by installing a new wiring harness in the front passenger-side airbag system on all affected vehicles.
Owners of affected vehicles will be notified by first class mail beginning February 27, 2004.
SUBJECT VEHICLES
Model
VIN Range
Build Date Range
2004 MPV
JM3LW28**40 500013 - 519303
August 20, 2003 - February 4, 2004
2004 RX-8
JM1FE17**40 100053 - 131563
April 10, 2003 - January 28, 2004
Note: The asterisk symbol "*" can be any letter or number.
OWNER NOTIFICATION
Mazda will notify U.S. owners by first class mail beginning February 27, 2004.
02-17-2004, 03:40 PM
#2
Registered User
Join Date: Sep 2003
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
02-17-2004, 06:07 PM
#5
ZOOM ZOOM
Join Date: May 2003
Location: Wally World
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
We have already done some stock units (i work at a dealership). most dealers now have the info on both recalls but will not have the parts until the end of Feb. or first week of March. Best advise right now is if you want to call the dealer just make an appointment for sometime in March at your convenience. do not expect anything to be done in Feb. this is for both recalls. hope this helps!
02-17-2004, 06:50 PM
#8
ZOOM ZOOM
Join Date: May 2003
Location: Wally World
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
it takes about 30 minutes to do both jobs total. but the thing is the transmission recall is done right next to the cat converter so the car has to sit to cool off first. so probably a couple hours.
02-17-2004, 08:07 PM
#9
Mad as a wet hen
Join Date: Jul 2003
Location: Big Blue State on the LEFT
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
Fubar (no offense... 
) --
Will the tech have to remove the dash or do other interior parts removal to redo the wiring harness for the pass. airbag? I'm really concerned about things getting scratched or gouged.
) --Will the tech have to remove the dash or do other interior parts removal to redo the wiring harness for the pass. airbag? I'm really concerned about things getting scratched or gouged.
02-18-2004, 06:24 AM
#10
Registered User
Join Date: Sep 2003
Location: New York
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
i have the automatic, but i'm in the vin range, so i'm guessing the i only have the airbag recall. how long will just the airbag take, and i'm also curious what does the fix entail... last time i went to get something fixed by my dealer my dash was slightly scratched up. will they have to tear the whole car apart?
02-18-2004, 12:08 PM
#11
ZOOM ZOOM
Join Date: May 2003
Location: Wally World
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Aratinga
Fubar (no offense...) --
Will the tech have to remove the dash or do other interior parts removal to redo the wiring harness for the pass. airbag? I'm really concerned about things getting scratched or gouged.
Fubar (no offense...
) --Will the tech have to remove the dash or do other interior parts removal to redo the wiring harness for the pass. airbag? I'm really concerned about things getting scratched or gouged.
02-18-2004, 12:53 PM
#12
8 the HARD way.
Join Date: Feb 2003
Location: San Antonio
Posts: 1,001
Likes: 0
Received 0 Likes
on
0 Posts
Heeeey fubar! Long time no see! Great to hear from someone inside on the recall. Thanks for the info..
Luckily the tranmission thingy I dont have to worry about (I think), just this airbag thingy..
Luckily the tranmission thingy I dont have to worry about (I think), just this airbag thingy..
02-18-2004, 01:19 PM
#13
RainMan is Back
Join Date: May 2003
Location: SF Bay Area
Posts: 2,650
Likes: 0
Received 0 Likes
on
0 Posts
RX-Nut, just have your mazda tech poke your vin # into his computer and the appropriate recalls will show for your vehicle. Oh yeah, fubar really helped me out in the "dark days" of pre-order.
02-18-2004, 09:27 PM
#14
Registered User
Join Date: Nov 2003
Location: Fayetteville, NC
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Question...does this only relate to the passenger front air bag or is it for all of the air bags on the passenger side to include the curtain bags? The reason I ask is that in November I took a pretty good hit in the passenger side doors and the air bags did not deploy. I'm not sure if it was because I was not moving that fast or if it could be related to this.
02-18-2004, 11:52 PM
#17
Registered User
Join Date: Jul 2003
Location: N.Miami/Aventura
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Crap!! Just checked ---My Mazda-- web pages and I am included on the recall. I was waiting for the dealer to call me regarding the updated "shock sensor" that was on order, now this.. ohh well. Question? Is there an update for the HEAT problem on the cupholders? (extra insulation? ) If anyone knows, please let me know so I can have all done at once. After driving for a couple of hours, the cup holder area is like a little oven in my car. 
I suppose this is part of first year blues, but i still love my 8 .
I suppose this is part of first year blues, but i still love my 8 .
CJ
02-19-2004, 01:42 PM
#19
ZOOM ZOOM
Join Date: May 2003
Location: Wally World
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RX-MEN-8
Crap!! Just checked ---My Mazda-- web pages and I am included on the recall. I was waiting for the dealer to call me regarding the updated "shock sensor" that was on order, now this.. ohh well. Question? Is there an update for the HEAT problem on the cupholders? (extra insulation? ) If anyone knows, please let me know so I can have all done at once. After driving for a couple of hours, the cup holder area is like a little oven in my car. I suppose this is part of first year blues, but i still love my 8 .
Crap!! Just checked ---My Mazda-- web pages and I am included on the recall. I was waiting for the dealer to call me regarding the updated "shock sensor" that was on order, now this.. ohh well. Question? Is there an update for the HEAT problem on the cupholders? (extra insulation? ) If anyone knows, please let me know so I can have all done at once. After driving for a couple of hours, the cup holder area is like a little oven in my car.
I suppose this is part of first year blues, but i still love my 8 .
02-19-2004, 09:18 PM
#21
MSU Spartans
Join Date: Oct 2003
Location: Okemos, MI
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
My dealer got the wiring harness in today and he called me, so I'm getting the new harness put in tomorrow. I'll tell you guys all the details after the installation
02-20-2004, 05:05 AM
#23
Whaaaa?
Join Date: Aug 2003
Location: San Diego, CA
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
3 recalls for a first model car seems OK to me - I think you're being oversensitive or looking to grandstand.
I had two recalls on my '01 Jeep TJ and those have been in production since '98 without major redesign, so you'd think that would be plenty of time to work out the issues.
My advice would be to sell it and fade away if it's getting to you that bad - certainly calling BS and getting all upset about it isn't going to get you very far.
I had two recalls on my '01 Jeep TJ and those have been in production since '98 without major redesign, so you'd think that would be plenty of time to work out the issues.
My advice would be to sell it and fade away if it's getting to you that bad - certainly calling BS and getting all upset about it isn't going to get you very far.
02-20-2004, 06:42 AM
#24
Registered User
Join Date: Feb 2004
Location: Indiana
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Efini 8:
I would not call the recalls major. A pain - yes. Major is like my old 300ZX - wiring harness for engine due to engine fires. Nissan had to do recalls a decade plus after production.
John - March 15 is my recall repair date
I would not call the recalls major. A pain - yes. Major is like my old 300ZX - wiring harness for engine due to engine fires. Nissan had to do recalls a decade plus after production.
John - March 15 is my recall repair date
Last edited by RX8_GT; 02-20-2004 at 08:08 PM.
