You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join RX8Club.com today!
I am facing a problem with the integration of Car2PC interface in my 2004 RX8,EU standards.I have btw the 9.55 firmware on board.
Actually,I cannot hear anything!Lets start from beginning:I used to have the PIE MAZ/ALP interface,which used to work very well.
When i changed to Car2PC,even though i followed the instructions - connected the interface at the cd-changer port in the back of the HU,and at the other end at the lineout of the M/B,with the usb attached to the PC - I don't have sound at all.The Car2PC is found in Windows Media Center 2005 that I have,and Winamp can accept orders from the wheel controls,but no sound ....
A difference that i noticed is that with the PIE MAZ/ALP interface,the EX reading at the HU,kept flashing while in use (while selected) - and that way i could hear sound,while the Car2PC doesn't flash and i cannot hear sound...The reading is EX 1 1 something
Any ideas would be appreciated...
Yannis
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on RX8Club.com!
Linear Mode
