Thommino

I want to install Parrot Mic, but I cannot find how remove a part of my car to pass the mic wire. Who can help me?
Thnaks

RotorWheeee

You dont want to mess with the air bags . Very good risk of injury , or diabling the airbag.

Thommino

Where Can I Install the mic, and where pass its cable?
Thanks

truemagellen

he Thommino listen to RotorWheee, yes that is an airbag, don't touch it unless you know what you are doing....but just be patient someone around here knows what to do

BlueGrimRX8

all you have to do is push the wire with a small flathead scredriver into the pillar, there is enough room back there for a lot of wires. I have my radar detector as well as a wire for the antenna of my Viper alarm running down that column.

huhsler

BlueGrimRX8, can you expand on that, maybe with a DIY entry or pictures? Thanks!

Thommino

But there is space also in that place yellow circled?
Thanks

Mugatu

iTrader: (1)

yes, i did that too with a radar detector where I wedged the wire between the frame and the pillar. A DIY isn't really necessary.

BlueGrimRX8

just make sure you have enough slack to run the wire from whereever up the pillar and across the front, then wrap a small flathead screwdriver with a thin cloth (don't want to scratch anything) then push the wire in and down a little so that it gets stuck behind the pillar. Don't have any pics becuase I am at work but if you don't figure it out PM me.

Thommino

Thanks, I hope to successfull with it.