You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join RX8Club.com today!
I installed strakes but I did not think it was possible as I already had the front mud guards on the car. To my delight I was able to unhook the top clip from the fender well and bend the guard just enough to get my big ugly hairy hand in there and pop out the side vent. Just wanted to let anyone interested know, it can be done and not let it deter you from buying the strakes if you already have the mud guards because the strakes really do make a difference.
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on RX8Club.com!
Sorry, I didn't take pictures. I removed the top clip from the fenderwell guard. You can bend the guard out a good way enough to reach your hand and arm in and squeeze the sidevent clips toward each other and push out at the same time.
Just make sure you align and tape the template correctly and place each strake in the proper positon such as upper left and lower right as they are marked and it should be a smooth installation. It took me about 45 minutes.
Linear Mode
