BJP

iTrader: (2)

I've had a Cobb AP for a couple of months now and I've watched Kane's videos. I want to know if their is a shop in the Midwest that knows what they are doing when I comes to tuning RX-8s on the dyno.

Thanks,

Brian

JakeKaminskisRacing

Mike Piecko @ Red Mist Automotive in Gilberts, IL

Awesome tuner, and great guy. Very affordable and he won't BS you!

jtizzle88

iTrader: (2)

I hit up redmist automotive on Facebook. i have a turbo 8 and looking to get it dyno tuned. He told me that COBB no longer supports the RX8. He also said he was going to call COBB since V2 with rx8 is no longer listed and let me know this morning. That was what he told me yesterday.

DAT2RTR

Mazda Maniac is the only authorized rx8 Cobb dealer. You have to buy it through him. After that, you can get access tuner race through Cobb. Or your tuner can do that.

JakeKaminskisRacing

I'll talk to Mike (Red Mist) today regarding this. He is a good friend and I'm sure he'll manage to work something out. Best tuner around, and only person I trust to tune my Honda Challenge race car.

jtizzle88

iTrader: (2)

I already have the Cobb I got used and unmarried. I have been working with Mazda Maniac for the past 4 months. He is only available 2 hours every other week. I am still not dialed in and would rather have it on a dyno to be tuned. Right now I have a rear main seal leak that I have to repair then will get back with Mike at Red mist to get it dynoed

JamesD31

I need to get my 8 tuned as well, I got a new engine ~12k ago and I just feel it's not putting out as much power as the other 8's at AutoX.

jtizzle88

iTrader: (2)

There is a tuning session for rotaries this weeked May 7 and 8th I believe at Deans performance. There is a guy named Steve Kan that will be doing tunes.




My tuner (Steve Kan) is coming up to tune some rotary vehicles. We do have tuning slots open still if anyone is interested (see list of ECUs below) and also wanted to open it up for some BBQ food and 3 pull dyno runs. If interested, PM me or drop a note in this thread. The tuning and bbq will be at Deans Performance in St Charles. Even if you just want to stop by to eat let me know so we can plan food appropriately. Dates are tentatively set for May 7th for bbq but May 6-8th for tuning services.

Pricing:
3 Rips on the dyno $80
Tuning prices vary depending on licensing and platform
Dyno fee is a flat $100 for the duration of tuning time

ECUs Tuned:
Accel Gen 7
Adaptronics
AEM EMS
AEM (FIC) Fuel/Ignition Controller
A'PEXi Power FC/FC Edit (all cars/model)
Autronic SMC, SM2 and SM4
Cobb Accessport for Rx8, GTR, Evo x, bmw, subaru, ford
Diablosport
Dynojet Power Commander / all models
DSM/ECM Link
EcuFlash for Subaru and Mitsubishi vehicles
Ecutek FRS
EFI Live
Electromotive Tec 3 and Tec 3R
F.A.S.T. and F.A.S.T. XFI
Fueltek
GReddy Emanage and Emanage Ultimate
Haltech E6X(K), F10X, E6GMX, E8, E11v2 and Platinum 1000/2000, elite 1500/2500
Haltech F10 Fuel Controller
Haltech Interceptor and Miniceptor
Hondata S300, Flash Pro and K-Pro
HP Tuners
Hydra EMS 2.5/2.6/2.7
Link G4
MAF Translator Pro, MAF Translator GenII and MAF Translator
MAP ECU I/II
Megasquirt
Mircotech LT8, LT10, LT12
MoTec M4, M48, M400, M600, M800 and M880
Rtek
SAFC or VAFC
SCT Flash
Turbo XS UTEC
UpRev
Wolf EMS


Here is the link Tuning and BBQ May 7, 2016 (Deans Performance) - The Chicago Garage