Intake Mani Swap
12-26-2011, 12:45 AM
#4
I am going to say it can not be done. You would need to do a motor swap, which is not exactly easy. The 4 port only has 4 ports, the 6 port has 6 ports. Where would the additional 2 ports go??????
I dont know the design of the 4 port (never cared), but the 6 port has 2 ports in the front iron for the front rotor, 2 ports in the center iron 1 for the front which makes a total of 3 and 1 for the rear rotor. The rear iron has 2 ports for the rear rotor.
I imagine the 4 port has 1 less port in the front and rear iron, or no ports in the center iron.
I dont know the design of the 4 port (never cared), but the 6 port has 2 ports in the front iron for the front rotor, 2 ports in the center iron 1 for the front which makes a total of 3 and 1 for the rear rotor. The rear iron has 2 ports for the rear rotor.
I imagine the 4 port has 1 less port in the front and rear iron, or no ports in the center iron.
12-26-2011, 01:08 AM
#7
Registered User
Thread Starter
Uhm so does anyone know if this is true?
12-26-2011, 01:11 AM
#8
SARX Legend
iTrader: (46)
Why don't you read up on the mechanical differences of a 4 port versus a 6 port and figure it out instead of asking everyone to spoon feed you? Once you do, you will realize how stupid your question is.
12-26-2011, 01:34 AM
#15
Registered User
Thread Starter
Yea with a cooler and a tune/flash whatever you want to call it you can.
12-26-2011, 01:52 AM
#19
Registered User
Thread Starter
Thanks for nothing. I found what I was looking for else where. Geez it took 3 hours. Seems like someone could have posted this "readily available information." but I guess it's easier to argue and complain than to actually. I see forums haven't changed much in the past few years.
12-26-2011, 04:48 AM
#21
Thanks for nothing. I found what I was looking for else where. Geez it took 3 hours. Seems like someone could have posted this "readily available information." but I guess it's easier to argue and complain than to actually. I see forums haven't changed much in the past few years.
I find that a great part of the information I have was acquired by looking up something and finding something else on the way. - Franklin P. Adams
12-26-2011, 08:53 AM
#22
Of course it took three hours because that's how every clueless inexperienced babe in the woods starts out. Nobody ever achieved a level of competency by having everything handed to them on silver platter. It would have taken me a few minutes, if that, to find it (except in this particular case I learned it along the way a long time ago).
I could write a whole page listing the techniques and phrasing that make a search more effective, which could then be made into a Sticky thread locked at the top of every forum category here and people like yourself will blow right past it without a second thought. People being clueless and then getting thumped for making a clueless mess is just the building block of life in internet forum land.
.
I could write a whole page listing the techniques and phrasing that make a search more effective, which could then be made into a Sticky thread locked at the top of every forum category here and people like yourself will blow right past it without a second thought. People being clueless and then getting thumped for making a clueless mess is just the building block of life in internet forum land.
.
Last edited by TeamRX8; 12-26-2011 at 08:56 AM.
12-26-2011, 09:03 AM
#23
Thanks for nothing. I found what I was looking for else where. Geez it took 3 hours. Seems like someone could have posted this "readily available information." but I guess it's easier to argue and complain than to actually. I see forums haven't changed much in the past few years.
thank you for your contribution in keeping that phase of the process alive and well, again there will always be a certain part of human society that goes through kicking and screaming about how hard life is rather than digging in and accepting the inevitability of the situation.
Ps: now that you know the answer don't you even feel a little bit stupid for starting a thread to ask the original question?
.
Last edited by TeamRX8; 12-26-2011 at 09:06 AM.
12-26-2011, 07:44 PM
#25
Its true, if you've been around for any amount of time you'd know by now that its much easier to take a little time to look it up for your self rather than deal with people telling you that you are stupid for asking. It IS easier and a lot more gratifying when you figure it out.