DIY: Fuel Door Install
#1
Thews8
Thread Starter
Fuel door Install
Ok I got me new Mazda Fuel door today. As i promised I will show you the install
Noo the Center does not open :P
heres the car before
Noo the Center does not open :P
heres the car before
Last edited by thew; 05-06-2004 at 08:00 PM.
#4
Thews8
Thread Starter
attach the top screw into the new door. Loosly fit the door into the opening. once you have checked that the door will close and be alligend in the middel of the opening you can tightin the screws
#11
Thews8
Thread Starter
its very easy only took me about 15 mins .. I have seen the satin finish.. and my chrom now theres a perl to ,, I tink i like mine the best thow .. it ties in the exhust finishers i installed..
Now i am installing the lighted shift ****. ill post those next.
GO for it get the darn thing
Now i am installing the lighted shift ****. ill post those next.
GO for it get the darn thing
#12
Registered User
Join Date: May 2004
Location: Pacifica, CA
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Is there any trick to be careful of, to make sure the door release mechanism still works? Last thing I want to do is end up with a door that won't open...
...Paul
PS> It looks sweet. This, plus strakes, are the two "mods" I want to do, and given the step-by-step I've seen here, I think I actually have the courage to do it myself! (Step one: Buy a screwdriver... Step two: Go back and buy the correct SIZE screwdriver... )
...Paul
PS> It looks sweet. This, plus strakes, are the two "mods" I want to do, and given the step-by-step I've seen here, I think I actually have the courage to do it myself! (Step one: Buy a screwdriver... Step two: Go back and buy the correct SIZE screwdriver... )
#15
Thews8
Thread Starter
no its really easy.. the release mec does not change at all.. you just take out the two screws the hold the door hing on the car..
It is very easy just make sure you tape over the paint with good painters tape.. the blue or green kind
It is very easy just make sure you tape over the paint with good painters tape.. the blue or green kind
#17
Thews8
Thread Starter
same thing diffrent angle
again the mec is not moved or touched.. just the door .. there is no reason anyone cant do this install in 20 min's alone.
you need on 8 mm socket. some blue painters tape. good luck
again the mec is not moved or touched.. just the door .. there is no reason anyone cant do this install in 20 min's alone.
you need on 8 mm socket. some blue painters tape. good luck
#22
Registered
Join Date: Oct 2003
Location: Vienna, Virginia
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
Smokin'! Thanks for the pics.
If anyone wants their car on my site that has one installed, please email tommy@finishlineperformance.com
No $tommy_bucks$ or nothing but I'll give credit and any plug for sumthin' if you want.
If anyone wants their car on my site that has one installed, please email tommy@finishlineperformance.com
No $tommy_bucks$ or nothing but I'll give credit and any plug for sumthin' if you want.