TheColonel

I came home for the weekend and I plan to bring tools back to my school to install my REVi and the ram air duct. However, I was stupid and didn't bring the instructions for the duct with me so that I would know what tools I need. Can someone who has it please tell me what tools I need?

Thanks

dannobre

iTrader: (3)

10mm socket and wrench ( 1/4 in drive OK)
14mm socket (3/8 or 1/2 in drive) and extension 8" if possible ( to remove bumper support bracket)
phillips screwdriver small and med...stubby would be easy
small slot screwdriver med slot screwdriver
small pair needlenose pliers

willhave8

I jsut installed my RAM aIr duct today and have already lost the instructions. But there are no special tools you need. Basically,

Flat head screw driver to remove 'clips'
Phillips head screw driver
10 & 14mm wrench (Maybe one or two others like a 12 or 8)

The Instructions list the bolts as the wrong size anyway.

and

Patience - especially if you have the fog lights. I have found they are a pain in the neck to get out and put back in. Spent the most time on them. total Job should be less than 90 minutes.

Good luck. I rank it a 4 on a scale of 10 to complete.

TheColonel

Thanks a lot. I'll let everyone know how it goes when I put it in over the next few days.

Jonjieracer

it'll be an easy install...there's a DIY here that you can always rely on.... cheers for RXer enthusiasts!!!!