yokohamaboi

iTrader: (1)

Ok ive searched and found people saying yes and no about sucking up water in the rain with a MazdaSpeed CAI. Please help cause im already in the process buying a MazdaSpeed CAI cause the K&N is on back order, should i wait or get the MazdaSpeed? please HELP!!! me choose!

mysql101

MS CAI is very nice. I haven't had any issues, and it rains a lot in Tampa. Just don't drive in 2' of water.

Jon316G

iTrader: (1)

MS CAI is fine, get that.
Just use caution when washing the car, don't direct the water stream directly at the filter.
I ran mine through many car washes with no problems.
Wasn't until the dealer sprayed water directly on the filter did I get too much water in my intake and it bogged the car down (water across the MAF).
Someone here had a good idea to put a plastic bag over the filter while washing the car just to be safe.
And don't worry about rain... I ran through many storms with no problems.

mysql101

Water doesn't hurt the engine. It just turns to steam. It actually helps clean the motor out. But I'd recommend distilled water, or some clean source for scheduled cleaning, over street puddles.

Jon316G

iTrader: (1)

Yeah... its not the water entering the engine, but the inaccurate reading across the MAF from the water.

yokohamaboi

iTrader: (1)

Sounds Good To me! :D was that 2FT of water or 2Inches haha

mysql101

the filter is mounted pretty high. You'd be in pretty deep water to cover it.

yokohamaboi

iTrader: (1)

Yeah your right. even though i don't have a Cold Air i always find a diffrent route with the least water :D also how many Mesh Screens do i need? 1 or 2? i only have one :[ my other one ripped

Jon316G

iTrader: (1)

The MS CAI should come with two screens, both within the couplings.

yokohamaboi

iTrader: (1)

Thanks Bro :D ill take pics when i get it and install it.

NoOdLe BoY

iTrader: (1)

remember the water sock thingy!!! it works nicely.

ive actually put it under the faucet and the water ran off the sides. and it doesnt restrict air flow.

yokohamaboi

iTrader: (1)

what water sock? outerwear?

invasion08

iTrader: (7)

This might help you

https://www.rx8club.com/series-i-tech-garage-22/aem-ms-intake-owners-171291/

cyclone1208

iTrader: (5)

I have K&N works quite well for me.....very happy with it

NoOdLe BoY

iTrader: (1)

yea thats the one!!! thanks!! the MS CAI comes with one of those in black. and i guess the AEM also.

yokohamaboi

iTrader: (1)

HAHA! :D SCWEET! well parts got shipped. and hopefully it will be here on Wedsday

nycgps

iTrader: (1)

MS CAI doesnt come with any screens.

it will ask you to take the screen out of your stock airbox setup.

yokohamaboi

iTrader: (1)

how many do you need?

Jon316G

iTrader: (1)

REALLY?!
Next time someone asks me if they should purchase the AEM or MS intake, I'll recommend AEM since they provide the screens in their couplers.
I know the screens in the OEM box can be a little tricky to remove.
I had to remove those for my Racing Beat intake.

Jon316G

iTrader: (1)

I retract my previous post.....
I couldn't help it and had to download the MS intake installation manual.
According to the contents section, the MS intake DOES come with two couplers:
Cold_Air_Intake Install.pdf

yokohamaboi

iTrader: (1)

Dude he just called you a little bitch

swoope

iTrader: (5)

fail.

beers

alz0rz

iTrader: (41)

The Mazdaspeed intake comes with 2 screens come on n00b!

And you can't hydrolock a rotary.

Wankel_8

iTrader: (2)

I have this MS kit on my car, I was pretty worried at the first, but the thing is the air filter came with filter wrap, so it helps to keep the filter dry and clean. And the funny thing is...my car seems to be running better and faster in the raining days.

Another solution is, to buy a heat shield and get it installed, that could help the stop the intake sucking water.

yokohamaboi

iTrader: (1)

SCWEET! :D do you get better throttle response? ive read on peoples threads that they got really good throttle response after their install. well it should be here in 3 more days can't wait haha :D