smrx8

iTrader: (1)

I'M going to be buying a clutch and flywheel has anyone heard of this name brand EXEDY ????? vivid racing has this on ebay

lurch519

to do a LOT of friction materials, brakes, clutches, etc

Rx7Roadster

Exedy makes good parts. They have been around for a while. Ive never heard anything bad about them.

takahashi

EXEDY has been racing for nearly decades in Japan. Have sold world wide. Japanese use that in their cars for a long time.

www.exedy.com.au www.exedy.co.jp

Good single clutch there. I am not sure they have flywheel for the 8

Jason

Great clutch, but complete overkill for the RX-8

smrx8

iTrader: (1)

They have the combo clutch and flywheel might just pick it up right now its at 500 on ebay with a buyout of 1600.

takahashi

Nice. I don't think they are overkill. Single clutch is ok. Double carbon clutch maybe an overkill.

If you turbo then yes. If you change the flywheel, it is also advised by many tuners advise to change the clutch too.

smrx8

iTrader: (1)

Overkill in what way not enough hp ?? can you give me a quote on clutch and flywheel

takahashi

sm,

Racing clutch may kill the driviability in congested traffic.

It is hard to ride the clutch at slow speed. You may stall a lot of time.

That is all.

smrx8

iTrader: (1)

Yeah the one on ebay is double ok ill do more searching

takahashi

Ask them what they think of it for city driving. They should be able to answer you.

In Japan, they only have single clutch. Since it is not selling twin plate carbon or triple plates for only 180 hp at the wheel. The single clutch has a torque rating that can handle a GReddy turbo too I think. I forgot what it was but I check it once and make sure I can change to a single clutch for the future FI.

Psylence

Twin plate clutch will have the added advantage of smaller clutch plates. Less rotational mass than one big single. Also spreads out the force more so a 2plate will also last longer. I would also assume that a twin plate will require slightly less pedal effort than a single plate of equivalent clamping force. Multiplate clutches include a flywheel as part of the deal too...

But it's total overkill for the RX8. The only reason to buy one is because it's trick and cool and you just happen to have loads of extra cash burning a hole in your pocket.

army_rx8

the stock clutch and pressure plate on the rx-8 are made by exedy :D so you already have some first hand experience with one of their products

haha so all you have to do is slap on a sticker that says "EXEDY" on your car and be done with it