The STX thread!
#3377
I'm not the only one who has come across this. Are you still on the stock intake? I wonder how big of a difference that makes. I didn't get the AP until after I made my intake so I have no comparison with stock. Either way, it doesn't really matter because it sounds like you're ok and getting a different tune anyway. Just thought I'd warn you about my experience!
#3379
Registered
Autocrossed for the first time ever a couple weekends ago. Bone stock was able to get some Michelin PSS's 245/40/18 for a good deal a couple days beforehand. Dude asked me to put the gopro on my car and of course it was my worst run lol. It was the last event here for the season since its so hot in Phoenix but will be looking forward to the fall!
#3380
Registered
iTrader: (1)
Autocrossed for the first time ever a couple weekends ago. Bone stock was able to get some Michelin PSS's 245/40/18 for a good deal a couple days beforehand. Dude asked me to put the gopro on my car and of course it was my worst run lol. It was the last event here for the season since its so hot in Phoenix but will be looking forward to the fall!
I've been the only RX-8 down here since I moved here last year. Though...I was usually the only one where I used to live, too. ha
#3381
Registered
Yup no RX-8's at my event either. It looks like their were some in the past from results I've read though. I might be able to make it down there :-)
#3382
Registered
iTrader: (1)
Most 8's haven't fared so well, but this one is still ticking like a clock!
It's a pretty good surface down here and not too far off the interstate. So, you should come down as long as you won't be faster than me
#3383
Registered
I've had a few people say, "Oh, I used to have one of those..." lol
Most 8's haven't fared so well, but this one is still ticking like a clock!
It's a pretty good surface down here and not too far off the interstate. So, you should come down as long as you won't be faster than me
Most 8's haven't fared so well, but this one is still ticking like a clock!
It's a pretty good surface down here and not too far off the interstate. So, you should come down as long as you won't be faster than me
#3384
V8 Traitor
Join Date: Oct 2011
Location: Abingdon, Harford County, MD
Posts: 600
Likes: 0
Received 5 Likes
on
4 Posts
gents, this weekend I'll be running an event that is 12 runs total I'll be alternating every three runs between 245/40/17 RE71R and 285/30/18 Hoosier A7, I will report the performance delta :-)
#3385
Registered
iTrader: (1)
Can you post how old the tires are and how many runs are on them. I've heard the A7s have quite an increased lifespan, over the A6s.
If that's true, it should make DSP more financially accessible.
#3386
V8 Traitor
Join Date: Oct 2011
Location: Abingdon, Harford County, MD
Posts: 600
Likes: 0
Received 5 Likes
on
4 Posts
I wasn't able to do this test for the stupidest reason ever, I thought the event was sunday the 3rd but it was actually Saturday the 2nd :-( I didn't realize until 2pm or so when I saw the first fb post about it. So I'll be doing it later on. Not likely this weekend but someday soon.
The Hoosiers currently have 33 runs on them, A7's are excellent to about 100 runs then drop off between 120 and 150 runs, which is actually pretty consistent with current leading street tires. Ive already won two tires in DSP though so as long as you do well the cost drops pretty fast, I know one guy who hasn't bought Hoosiers in years :-)
The Hoosiers currently have 33 runs on them, A7's are excellent to about 100 runs then drop off between 120 and 150 runs, which is actually pretty consistent with current leading street tires. Ive already won two tires in DSP though so as long as you do well the cost drops pretty fast, I know one guy who hasn't bought Hoosiers in years :-)
Last edited by Nathan Atkins; 07-08-2016 at 10:45 AM.
#3387
Registered
iTrader: (1)
Howdy Doody, every body!
I figured I'd drop a few lines on here, since it's been quiet in this thread.
Last year, I picked up Broda's STX 04 Base at Nationals, replacing my virtually stock 06 GT. I had no business competing there and couldn't have done much worse, but I still had a pretty good time. Since then, I've focused on my driving and not TOO much monkeying with the set-up, as it was good enough for Broda to get a trophy! (It was great to see the proof that I didn't buy a dud!)
While I haven't made it to as many events as I wanted to, this year, I managed to do pretty well at my last event. 1st in STX and PAX'd 6th, behind a "Driver of Eminence" and a few other people who have won trophies at Nationals and at Tour events. So, I'm feeling pretty good about things this year, especially since I couldn't do much worse than I did last year!
So, who else is going to Nationals?!
I figured I'd drop a few lines on here, since it's been quiet in this thread.
Last year, I picked up Broda's STX 04 Base at Nationals, replacing my virtually stock 06 GT. I had no business competing there and couldn't have done much worse, but I still had a pretty good time. Since then, I've focused on my driving and not TOO much monkeying with the set-up, as it was good enough for Broda to get a trophy! (It was great to see the proof that I didn't buy a dud!)
While I haven't made it to as many events as I wanted to, this year, I managed to do pretty well at my last event. 1st in STX and PAX'd 6th, behind a "Driver of Eminence" and a few other people who have won trophies at Nationals and at Tour events. So, I'm feeling pretty good about things this year, especially since I couldn't do much worse than I did last year!
So, who else is going to Nationals?!
#3390
Registered
There was nowhere near enough blue RX-8 in that Driver Mod video, so I brought some more
AZBR 7-31-16
AZBR 7-31-16
#3393
Anyone need / want a set of 17x9 TRMotorsport C3 w/ 245 Rival S (12 autocross runs)? 2x wheels are brand new. 2x wheels are in excellent condition. They've been scrubbed in and are ready for Lincoln... I'll deliver to Lincoln $1200 OBO. Please... just need them gone!
#3394
Nathan, I had been reading back on some of your experimentation with shock/spring combos, and I'm wondering what you settled on. Is the info in your sig the latest? And did you have the shocks revalved for the springs?
#3395
V8 Traitor
Join Date: Oct 2011
Location: Abingdon, Harford County, MD
Posts: 600
Likes: 0
Received 5 Likes
on
4 Posts
still on 10/7, I had the shocks revalved by bilstein to suit the spring rates, seems to be working well in DSP so far. I have plans to go to 14/10 and revalve accordingly, but not until after Nationals
#3397
There's certain value to be had with spec'in out dampers which are the proper length, tuned for solo, adjustable and rebuildable. If you're going to spend the time and effort building and competing in the car, you should look further than the bilsteins.
#3398
V8 Traitor
Join Date: Oct 2011
Location: Abingdon, Harford County, MD
Posts: 600
Likes: 0
Received 5 Likes
on
4 Posts
Totally agree with Jeff here, if you want to be any more than casual with it, bring the right tools for the job from the outset. Just finding out what someone settled on isn't the best approach, without exploring why they settled there. My setup is pretty heavily compromised and not likely to be all that competitive in Lincoln, so take that into account.
#3400
V8 Traitor
Join Date: Oct 2011
Location: Abingdon, Harford County, MD
Posts: 600
Likes: 0
Received 5 Likes
on
4 Posts
ZiG, I'm open to selling you my set of Bilsteins (recently revalved and rebuilt by bilstein) and the associated parts.
dampers
springs 10k/7k main springs, hyperco helper springs
threaded sleeves and adjustable perches
front and rear top hats and OEM hardware/grommets etc for basic bolt on installation.
These work just fine, but I just don't have the time to invest into making them work competently at a national level. I'm just going to save up enough money for a top tier "easy button" suspension solution. If you have the time and knowledge to deal with these than you're welcome to make and offer. I'll send you my number via PM if you're interested
dampers
springs 10k/7k main springs, hyperco helper springs
threaded sleeves and adjustable perches
front and rear top hats and OEM hardware/grommets etc for basic bolt on installation.
These work just fine, but I just don't have the time to invest into making them work competently at a national level. I'm just going to save up enough money for a top tier "easy button" suspension solution. If you have the time and knowledge to deal with these than you're welcome to make and offer. I'll send you my number via PM if you're interested