{ FS } STX Fire Sale
11-18-2015, 09:37 PM
#1
Jim51
Thread Starter
iTrader: (4)
Join Date: Nov 2007
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
STX Fire Sale
Category: Accessories
Price: $1250
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I
Location (US State/Canada/Int): SC
Item Condition: Used
Hotchkis RX8 Sway bar set (not the softer MX5 bar) F&R $250
Green Air Filter for stock air box (used only for National events) $40
Andy's Autosport cat with custom resonator $150
BHR Mid-pipe with HJS Race Cat sold
(either cat is quiet enough for DD use but will set occasional CELs unless disabled with Cobb)
KW Variant 3 Coilovers Sold
Cobb Access Tuner "unmarried" Sold
SR Motorsports Pulley Kit w/ spare belts sold
Wheels and Tires:
245 BFG Rival S approx. 50 runs plus 2500 mi. $400
Enkie RPF1 17X9 Silver with 255 Bridgestone RE71R approx. 30 auto-x runs plus 1000 street miles Sold
TR Motorsports C3 17X9 Sold
Last edited by fossumja; 01-18-2016 at 04:57 PM. Reason: add detail
11-20-2015, 07:13 AM
#5
offset on the rpf1?
11-25-2015, 07:29 PM
#9
Water Foul
11-26-2015, 09:22 AM
#10
Jim51
Thread Starter
iTrader: (4)
Join Date: Nov 2007
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Any particular views you would like to see?
"Custom BHR Resonated midpipe with HJS Motorsport 100 CPI high flow cat. SCCA STX legal. I had this midpipe built specially for reliability, longevity and maximum power gains for auto-x. It is possibly the nicest catted midpipe one could find for an RX-8.
This is a genuine BHR midpipe that I ordered new from BHR. I had the HJS cat welded in to replace the Davesport cat the BHR midpipe originally came with. BHR does not recommend the cat that comes with their midpipe for track/auto-x and sure enough, mine ended up melting in a few auto-x events, so it was definitely not suited for that kind of use. I purchased the HJS cat and had it tig-welded to take care of that issue. While HJS products are prohibitively expensive, they can withstand the heat of the Renesis if you must run a catted setup. The HJS has been on for 14K miles and is in great shape. The BHR resonator has also been perfect. Very quiet and no issues with the glass packing like other cheaper resonators.
The midpipe has OEM-like fitment, as expected from BHR. Weighs in at a mere 11lbs, or just about half of the stock midpipe weight. "
01-24-2016, 05:52 PM
#12
I bought this cat from 6MTGirl back in February, put probably 6K mi on it since. Came with a spare O2 sensor (not pictured) I will include. Below is a description from her sales post.
Any particular views you would like to see?
"Custom BHR Resonated midpipe with HJS Motorsport 100 CPI high flow cat. SCCA STX legal. I had this midpipe built specially for reliability, longevity and maximum power gains for auto-x. It is possibly the nicest catted midpipe one could find for an RX-8.
This is a genuine BHR midpipe that I ordered new from BHR. I had the HJS cat welded in to replace the Davesport cat the BHR midpipe originally came with. BHR does not recommend the cat that comes with their midpipe for track/auto-x and sure enough, mine ended up melting in a few auto-x events, so it was definitely not suited for that kind of use. I purchased the HJS cat and had it tig-welded to take care of that issue. While HJS products are prohibitively expensive, they can withstand the heat of the Renesis if you must run a catted setup. The HJS has been on for 14K miles and is in great shape. The BHR resonator has also been perfect. Very quiet and no issues with the glass packing like other cheaper resonators.
The midpipe has OEM-like fitment, as expected from BHR. Weighs in at a mere 11lbs, or just about half of the stock midpipe weight. "
Any particular views you would like to see?
"Custom BHR Resonated midpipe with HJS Motorsport 100 CPI high flow cat. SCCA STX legal. I had this midpipe built specially for reliability, longevity and maximum power gains for auto-x. It is possibly the nicest catted midpipe one could find for an RX-8.
This is a genuine BHR midpipe that I ordered new from BHR. I had the HJS cat welded in to replace the Davesport cat the BHR midpipe originally came with. BHR does not recommend the cat that comes with their midpipe for track/auto-x and sure enough, mine ended up melting in a few auto-x events, so it was definitely not suited for that kind of use. I purchased the HJS cat and had it tig-welded to take care of that issue. While HJS products are prohibitively expensive, they can withstand the heat of the Renesis if you must run a catted setup. The HJS has been on for 14K miles and is in great shape. The BHR resonator has also been perfect. Very quiet and no issues with the glass packing like other cheaper resonators.
The midpipe has OEM-like fitment, as expected from BHR. Weighs in at a mere 11lbs, or just about half of the stock midpipe weight. "
the bhr will never have any issues with glass packing, because it is not packed with anything at all, has a pretty ingenious straight pipe wrapped with a spiral sleeve.
04-07-2016, 05:19 PM
#16
Registered
I would be interested in the Hotchkis RX8 Sway bar set ...
It it part # 22437F/R ??
If they are the correct set can you PM me your pricing to 91745
It it part # 22437F/R ??
If they are the correct set can you PM me your pricing to 91745
Last edited by rotarydude07; 04-07-2016 at 05:21 PM.