{ FS } Semi-Solid OEM Engine Mounts - Urethane Filled
02-27-2014, 08:50 AM
#1
Registered
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Semi-Solid OEM Engine Mounts - Urethane Filled
Category: Drivetrain
Price: $150
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I, Series II
Location (US State/Canada/Int): NJ
Item Condition: Used
$150 + shippingI have a spare set of gutted and urethane filled OEM engine mounts. With this setup, you'll gain more planted and tighter handling, as well as crisper shifting.
These were professionally modified. The 80A urethane was properly vacuum degassed and cured in a pressure chamber to ensure ZERO air bubbles or voids.
The OEM mounts are used, but the rubber has no tears and is in excellent condition, and the threads for mounting the engine to the mounts are clean.
.
03-09-2014, 01:49 PM
#3
Registered
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I will accept cores for a $50 credit (granted they are in a rebuildable condition).
I can offer this as a service, as well, if there is demand for it, but I do not currently have a stock of cores. If enough people are interested, I may be able to source a couple sets of mounts to have ready so that I can ship out the filled mounts first, and then you could send back your cores.
Thanks all for the inquiries, and let me know if interested!
I can offer this as a service, as well, if there is demand for it, but I do not currently have a stock of cores. If enough people are interested, I may be able to source a couple sets of mounts to have ready so that I can ship out the filled mounts first, and then you could send back your cores.
Thanks all for the inquiries, and let me know if interested!
03-10-2014, 06:26 PM
#6
Registered
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
There will be some more vibration with this setup, but the Renesis is pretty smooth so the increase is negligible, in my opinion. But of course, YMMV, as increase in NVH is always subjective.
Never tried other aftermarket mounts, so I can't honestly say how these compare, but the improvements over stock with the urethane filled mounts are significant - car feels much more solid and planted, and handling is more immediate.
Fitment with these is perfect, as it retains all the OEM mounting points.
03-10-2014, 07:39 PM
#7
There will be some more vibration with this setup, but the Renesis is pretty smooth so the increase is negligible, in my opinion. But of course, YMMV, as increase in NVH is always subjective.
Never tried other aftermarket mounts, so I can't honestly say how these compare, but the improvements over stock with the urethane filled mounts are significant - car feels much more solid and planted, and handling is more immediate.
Fitment with these is perfect, as it retains all the OEM mounting points.
Never tried other aftermarket mounts, so I can't honestly say how these compare, but the improvements over stock with the urethane filled mounts are significant - car feels much more solid and planted, and handling is more immediate.
Fitment with these is perfect, as it retains all the OEM mounting points.
Can I get a price on a set shipped to 11421, if you have a set available to fill? I plan on shipping back my OEM as cores to you as well.
03-11-2014, 01:12 PM
#10
Registered
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, so the set pictured above is sold pending payment (another member PM'd me earlier in the week), but like I stated above, I will absolutely keep facilitating orders. Only issue right now is I don't have an extra set of cores, so there will be a lag btwn orders until I get the cores back.
If anyone has any leads on cores, it would certainly be helpful. Please shoot me a PM.
Shipping will be a flat rate of $10 via USPS for CONUS.
If anyone has any leads on cores, it would certainly be helpful. Please shoot me a PM.
Shipping will be a flat rate of $10 via USPS for CONUS.
03-21-2014, 06:39 PM
#16
I like cheese!
Join Date: Mar 2014
Location: Marietta, GA
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
03-27-2014, 04:05 PM
#17
Registered
Urgently need motor mount now due to damage.
I ordered a set from rx8performance, so I will not need one of yours.
Would you want my cores for $50 shipped after I install?
I ordered a set from rx8performance, so I will not need one of yours.
Would you want my cores for $50 shipped after I install?
04-23-2014, 12:07 PM
#21
I like cheese!
Join Date: Mar 2014
Location: Marietta, GA
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone who installed these mounts notice there is still excessive engine movement when on/off throttle?
I notice the NVH at idle is less than before but i still have movement when on/off the gas which is the main reason for changing the mounts.
I notice the NVH at idle is less than before but i still have movement when on/off the gas which is the main reason for changing the mounts.
Turn Around Time?
Thread
Thread Starter
Forum
Replies
Last Post
Audio Concepts ATL
New Member Forum
21
09-26-2021 01:59 PM
Jazzmeson
West For Sale/Wanted
1
07-31-2015 01:48 AM
Jazzmeson
RX-8 Parts For Sale/Wanted
7
07-31-2015 01:47 AM
