kma5783's Build Thread
04-11-2012, 08:16 PM
#1
kma5783's Build Thread
Ok so I figure it's time I start a Build Thread, with lots of upcoming planned mods I figure it's a good time.
List of Mods when I bought the car:
Mazdaspeed Front Bumper
Mazdaspeed Sideskirts
Mazdaspeed Rear Underspoiler
Tanabe Sustec Pro Five Coilovers
AFE Short Shifter
Borla Exhaust
RP Super Cat
Mazdaspeed CAI
Mazdaspeed Strut Bar
Work Emotion 11R Glim Silver 18×9.5 +30
Falken FK-452 255/40/18
MXP Purple Lug Nuts
10mm Project Kics Spacers (Rear)
Slotted Drilled Rotors(from RX7Store.com)
Hawk HPS Brake Pads
Stainless Steel Brake Lines
LEDs all around
Kenwood DNX-6140 Headunit
Metra Kit
PAC SWI-JACK
Backup Camera
Infinity 1300a amp
Two Infinity Reference 1052w 4-ohm 10″ Subs
Zenclosures Sub box
2009 Seat Covers
Blacked Out Emblems
35% Tint
6000K HID Headlights
PIAA Yellow Fogs
Replica Kei Office Eyelids
Lamin-x Yellow Fog light Vinyl
Some Pics:
Interior Pics:
Since I bought the car, some things have changed...
Installed Progress Tech Sways and Evo-R Endlinks
Installed a Piano Black Voodoo Shift ****
Changed Transmission and Diff Fluids to Redline MT-90 and Redline 75w-90 respectively
Replaced the RP Supercat with a BHR Midpipe
Installed Big ***** Puddle Lights
Removed the Replica Kei Office Eyelids
Removed the 10mm Rear Spacers and straightened out the alignment due to Camber Wear.
Installed Upgraded Starter
Installed a BHR Ignition System
Removed Rotary FX Corners and Installed Clear Corners
Bought Cobb AP(Hasn't been tuned yet, Plan on going FI)
More Recent Pics:
Now for a Teaser...
Why would my interior look like this?...
List of Mods when I bought the car:
Mazdaspeed Front Bumper
Mazdaspeed Sideskirts
Mazdaspeed Rear Underspoiler
Tanabe Sustec Pro Five Coilovers
AFE Short Shifter
Borla Exhaust
RP Super Cat
Mazdaspeed CAI
Mazdaspeed Strut Bar
Work Emotion 11R Glim Silver 18×9.5 +30
Falken FK-452 255/40/18
MXP Purple Lug Nuts
10mm Project Kics Spacers (Rear)
Slotted Drilled Rotors(from RX7Store.com)
Hawk HPS Brake Pads
Stainless Steel Brake Lines
LEDs all around
Kenwood DNX-6140 Headunit
Metra Kit
PAC SWI-JACK
Backup Camera
Infinity 1300a amp
Two Infinity Reference 1052w 4-ohm 10″ Subs
Zenclosures Sub box
2009 Seat Covers
Blacked Out Emblems
35% Tint
6000K HID Headlights
PIAA Yellow Fogs
Replica Kei Office Eyelids
Lamin-x Yellow Fog light Vinyl
Some Pics:
Interior Pics:
Since I bought the car, some things have changed...
Installed Progress Tech Sways and Evo-R Endlinks
Installed a Piano Black Voodoo Shift ****
Changed Transmission and Diff Fluids to Redline MT-90 and Redline 75w-90 respectively
Replaced the RP Supercat with a BHR Midpipe
Installed Big ***** Puddle Lights
Removed the Replica Kei Office Eyelids
Removed the 10mm Rear Spacers and straightened out the alignment due to Camber Wear.
Installed Upgraded Starter
Installed a BHR Ignition System
Removed Rotary FX Corners and Installed Clear Corners
Bought Cobb AP(Hasn't been tuned yet, Plan on going FI)
More Recent Pics:
Now for a Teaser...
Why would my interior look like this?...
Last edited by kma5783; 04-12-2012 at 09:58 PM.
04-11-2012, 09:31 PM
#9
Nope not Alcantara, that shift boot will actually be changed soon to match.
And yes the car was bought with most of these mods on it, that is admitted almost immediately in the thread. The build thread part of it is more for what's to come in the near future.
And yes the car was bought with most of these mods on it, that is admitted almost immediately in the thread. The build thread part of it is more for what's to come in the near future.
Last edited by kma5783; 04-11-2012 at 10:31 PM.
Love your car man, good luck with your build, hopefully you don't have to play the waiting game like me 
04-12-2012, 04:16 PM
#18
Yea hopefully, I have to figure out exactly what I'm doing first, I keep going back and forth haha. When are you supposed to get the Turbo back?
Nope
Yup...Bought it from her early last year and had it shipped down to Tampa.
04-12-2012, 04:27 PM
#19
SARX Legend
iTrader: (46)
Well it has been a month and a half, it was supposed to go out to me last week, now apparently it's a delay at the machine shop so who knows when I will get it.
I have been wanting a set of clothe SII seats, I like the way they look/feel and they are light. In fact the factory cloth seats are lighter than the Sparco's we put in Hoss-05's car.
I have been wanting a set of clothe SII seats, I like the way they look/feel and they are light. In fact the factory cloth seats are lighter than the Sparco's we put in Hoss-05's car.
04-12-2012, 04:35 PM
#20
Well it has been a month and a half, it was supposed to go out to me last week, now apparently it's a delay at the machine shop so who knows when I will get it.
I have been wanting a set of clothe SII seats, I like the way they look/feel and they are light. In fact the factory cloth seats are lighter than the Sparco's we put in Hoss-05's car.
I have been wanting a set of clothe SII seats, I like the way they look/feel and they are light. In fact the factory cloth seats are lighter than the Sparco's we put in Hoss-05's car.
One of the local guys is interested in them, if he doesn't buy them I'll be posting them up for sale.
