dtorre

LONG VENT!!!!

Well I really haven't driven the 8 to much simply because its winter and the 8's feet don't like it. Well Starting back a few months ago I started getting a rattle whenever I would drive slowly coming from the front right of my car....thought it might be the spring from the TSB so figured I'd get it taken care of in the Spring...

well today I actually decided to drive my car.....Was driving about 70 mph with that annoying rattle when all of a sudden I hear a thump under my car on the passenger side like I hit something...

SO I step on my brakes and the car veers to the right...and then suddenly my TPMS light comes on...

so immediately I think ooops popped my front my right tire..bye bye beautiful Toyo...

well I get out and check the pressure....all is good...so I circle the car and look at my back left wheel...its completely flat...I try putting air in it but you can just hear it leaking out just as fast....

so two hours later I get a stocker back on and decide to drive off after the tow truck leaves....well ....

The first thing I notice is, "Hey the rattles gone"! .......so im happy until I get off the highway and pull up to a light.....

I press my brake and the car jerks to the right, im like WTF? So I get out in a mcdonalds about 100 yards away and check my front right wheel....I shake it and the thing actually shakes.....I can move the wheel like a B(#*$ so now I know somethings broken...so I limp home...braek pressure seems to have dropped so I have to engine brake like crazy ...

I get home and let my bro drive it at about 5 mph and I see the wheel is just wobbling...I check the bolts and they are all tight....and I don't think the bearings on the wheel are bad because the control arm and everything else shakes when I try and shake the wheel as well......

so tommorrow its off to the dealership to find out what broke off my car and popped my new Toyo tire......awesome

Frynge

dude...ow...sorry to hear. o.o

NgoRX8

iTrader: (1)

damn, good luck man.

Razz1

Is that the missing defective control arm they've been searching for with the recall?

They were concerned one or two of them slipped into the US market.

RX8Carnage

Sorry for the bad luck keep us posted and good luck

dtorre

Knowing my luck I probally did get a POS control arm....just wondering how much this is gonna cost me......allready paid a pretty penny for the tires....and didn't get ROAD HAZARD PROTECTION

im also slammed on 19's with s techs and koni's ....so lets see the stealership honor a warranty

RX8Carnage

Road hazard only wants to give me $100 for the tire i have out stock cost 230 a piece so lot of help there. What dealership do you go to

dtorre

I normally go to Northpark Mazda and im confident they would take care of me.....only im 2 hours away in Killeen Texas as the moment so Im gonna have to take it to Dennis Eakin Mazda ><

Raptor2k

We're there for you man

dtorre

Ok well I found out what the problem is. I don't think the control arm is broken, I seem to be missing a bolt or something that holds the arm in place or some doodad of the sorts............do you guys know whats missing? And if I can buy the piece and install it myself without having to pay the dealership for labor ?

Bill#2

Take that control arm out and see if the rubber bushing is coming out, which looks like it is in that first pic. If you can hammer it back and find a bolt that fits, you're home free. Replacing the tire's a different story.
Bill

cavemancan

HOLY CRAP!!!

I get the same rattle in my right front!

I keep sending it back to the dealer and they tell me the sound is gone. The thing is that when they return the car to me the sound indeed goes away but after a while driving (Afew days) the sound returns.

In my previous car I had a similar sound and it was the swaybar not being torqued down correctly. I am losing my freggin mind trying to figure it out.

I will check in the morning to see if this could be the problem.

lurch519

some advice. if you did the lowering spring install yourself, you messed up and didnt tighten something. if you had the job done professionally, take it back to the spot where it was done and raise hell. they didnt tighten the control arm bolts.

dtorre

Had it done at Dennis Eakin Mazda a couple months back when I got my clutch replaced...have only put on like 2-3K miles since then ><.

Thanks for all the quick help and support guys =)

Here's a little to pay you back

dtorre

Oh God...what a butterface lol......I only saw it in thumbnail form before......lol I apologize

cavemancan

Whats wrong with you!

I dont even see a face...for some reason my eyes just wont leave the boob area!

dtorre

Hey does anyone know the specs for the size of the control arm bolt...mazda doesn't have them in stock and couldn't even tell me the size so I could go pick one up ><

Krankor

No, d00d, no specs. The topic has changed, we're now talking about boobies.

:boobies:

Bill#2

Take the bolt from the control arm on the other side off, see if it will work on the missing bolt's side. If it does, get a ride down to one of the nut and bolt places in town like Ace Bolt And Screw, or Alamo Bolt And Screw and have them dig a new bolt out for you. Worse case scenario, they don't have it, haul *** to Pick-n-Pull and go to the Mazda section and dig around there.

LionZoo

Not a good idea. You also need to know the hardness spec for the bolt in addition to the type, length, size, and thread pitch.

dtorre

Mazda has it now...ordered the special bolt and should have it back to me by tommorrow...oh well